Editor believes that many friends who want to apply for the safety officer exam are very concerned about the difficulty of the security officer C certificate exam. The editor has compiled relevant information for everyone to understand.
Safety officer C certificate is also called the third-class personnel C certificate and the third-class personnel C certificate. The safety officer C certificate is a full-time safety production management personnel of a construction enterprise. It refers to a person who is engaged in safety production management in the enterprise, including the person in charge of the enterprise safety production management organization and its staff and full-time safety production management personnel at the construction site. Those who pass the third category of personnel examination will be awarded the "Certificate of Safe Production Assessment" for the corresponding position by the construction department, and the third category of personnel certificates will be used nationwide.
Safety officer C1 certificate is a mechanical safety officer certificate; the examination content is 40% of the technology, 23% of the safety management, 20% of the laws and regulations, and 8% of labor protection and accident first aid.
Security C2 certificate is a civil engineering safety officer certificate; the examination content is 34% of security technology, 22% of laws and regulations, 22% of security management, 11% of labor protection, 11% of green building and environmental protection.
Security C3 certificate is a comprehensive safety officer certificate; the examination content is 35% of safety technology, 25% of laws and regulations, 25% of safety management, 8% of green buildings and environmental protection, and 7% of labor protection and accident first aid.
Score distribution of security clerk C certificate:
Question type: Multiple choice: Single choice 50 points; Multiple choice 20 points
Judgment question: 30 points
Total score: 100 points
Pass: 60 points
(differences in different regions)
Security clerk C certificate questions are not difficult, and all the test questions are taken from the textbook. As long as you prepare carefully, the editor believes that everyone can pass the exam. The editor has also prepared a safety officer C certificate exam question bank for everyone to learn.
Question bank source: Public account [Safety Officer Examination Book]
1. High-risk and crowded units should () organize at least one comprehensive or special emergency plan drill.
A sea month
B sea half year
C. Every year
D. Every two years
Correct answer: B
2. High-risk and densely populated units should () carry out emergency plan evaluation at least once.
A sea half year
B sea year
C. Every 2 years
D sea 5 years
Correct answer: C
03. After a production safety accident occurs, the relevant personnel at the accident site shall immediately report to the person in charge of the unit. After receiving the report, the head of the unit shall immediately activate the emergency plan, take emergency rescue measures, and report the accident situation to the emergency management department of the people's government at or above the county level in the place of production in accordance with relevant regulations, and report to the local township people's government and street office at the same time.
A.1 hour
B.2 hours
C.12 hours
D.24 hours
High answer: A
Correct answer: A
4. [Judgement question] When the seat belt is used for the specified period of time, enterprises must randomly select 2 seat belts from each batch for inspection. As long as one fails, the entire batch of seat belts must be stopped and scrapped. (√)
5. [Multiple choice question] The safety belts on construction sites should be hung high and low in any occasion. Pay attention to prevent swing and collisions. Do not use knots on ropes. (×)
6. [Judgement Question] The notes of key parts and links involving construction safety and the guidance put forward by construction project designers on the prevention of production safety accidents are not the content of safety technical briefing .(×)
7. Production and operation units shall establish corresponding mechanisms to strengthen () the implementation of the safety production responsibility system, and ensure the implementation of the safety production responsibility system.
A. Comprehensive management
B. Supervision and assessment
C. Supervision and management
D. Comprehensive supervision and management
Answer: B
8. During the construction of a sewer project, the depth of the groove is changed from 1.7-2.0m to 4-4.5m, which belongs to the project (). The construction plan should be modified and implemented after re-approval.
A.General change
B.Normal change
C.Major change
D.Timely change
Answer: C
9. The main stress-bearing components of tower cranes such as tower body, arm frame, etc. are repaired after damage. The stress of the structure of the test shall not be lower than the original calculated stress, otherwise () should be given.
A. Repair
B. Scrap
C. Alternate processing
D. Downgrade using
Answer: B
10. [Multiple choice question] When installing the template, you should do (). (CDE)
A, do not leak slurry
B, uniform size
C, people pick up and drop
D, load and transport
E, throwing
E, strictly prohibiting throwing
11, [Multiple choice question] The driver of pile driver operation must pass () and send it to () after passing through the relevant departments (). Only then can (). Unlicensed personnel are strictly prohibited from operating pile drivers. (Fill in order) (BCEA)
A, individual operation
B, professional training
C, assessment approval
D, high school culture
E, qualification certificate
12, [Multiple choice question] Which of the following equipment is the most common vertical transportation equipment in construction? () ( ACE )
A, tower crane
B, mixer
C, construction lift
D, pile driver
E, Gantry and Derrick Material hoist
above is all the content brought by the editor. Follow the editor and continue to update the relevant content of the safety officer for everyone~
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-