Security officers are divided into different categories, and many friends may not know much about it. The editor has compiled relevant information and let’s learn about it! Safety officers are mainly responsible for the daily supervision and management of production safety, carry

security officers are divided into different categories, and many friends may not know much about it. The editor has compiled relevant information and let’s learn about it!

Safety officer is mainly responsible for the daily supervision and management of production safety, performing regular and irregular safety inspections, and controlling the occurrence of safety accidents.

types are divided into two types

One is a safety officer of the Safety Supervision Bureau: used in enterprises of special occupation , which is commonly referred to as the factory safety officer.

Another type is the construction category. It is also called the safety officer three types of personnel issued by the Construction Bureau: Safety officer A certificate (holding by the legal person), Safety officer B certificate (holding by the project manager), Safety officer C certificate ( full-time safety officer )

1, "Safety Management Personnel" C certificate: refers to the main person in charge of the enterprise ( legal representative , manager, deputy manager in charge of safety production work, and technical person in charge).

2, "Safety Management Personnel" Certificate B: refers to the company's project leader (with first and second-level construction engineer ).

3, "Safety Management Personnel" C1, C2, C3 Certificate: refers to the company's full-time safety production management personnel (safety section chief, safety officer).

. Do you have any understanding now? The editor has also prepared a safety officer examination question bank for everyone.

question bank source: official account [Safety officer examination book]

1. According to the provisions of the " Occupational Disease Prevention and Control Law ", the following statements on the protection of occupational disease patients are wrong ().

A. The employment patient changes his/her job position and his/her benefits will remain unchanged in accordance with the law.

B. The employer shall arrange for the treatment, rehabilitation and regular examinations of patients with occupational diseases in accordance with relevant national regulations. The employer shall provide appropriate job allowances to workers engaged in work with occupational disease hazards

C. l2

D. For patients with occupational diseases who are not suitable to continue engaging in their original work, the employer may give the parties a one-time subsidy and terminate the labor contract

Answer: D

2. According to regulations, the full-time safety management personnel requirements for enterprise safety management institutions of the general contracting qualification sequence are special, first, second and below personnel.

A.6, 5, 4

B.6, 5, 3

C.6, 4, 3

D.6, 4, 2

Answer: C

3. The () of the construction company is responsible for the safety of its enterprise.

A. General Manager

B. Project Manager

C. Full-time safety production administrator

D. Legal representative

Answer: D

Answer: D

4. In the three-phase four-wire system, when the three phases are unbalanced, three-phase voltage is equal, and the neutral current is (  ).

A. equals zero

B. not equals zero

C. Increase

D. Reduce

Answer: B

5. Total 1 distribution box should be ( ) 30mA, and the leakage operation time is greater than 0.1s.

A. greater than

B. equal to

C. less than

D. Uncertain

Answer: C

6, Concrete formwork support erection height ( ) and above requires expert demonstration.

A.4m

B.6m

C.8m

D.10m

Answer: C

Answer: C

7. According to the " Construction Construction Enterprise Safety Management Organization Setting and Full-time Safety Management Staff Equipment Measures for the Equipment of Full-time Safety Management Staff of Building Construction Enterprises", the general contractor of the housing construction engineering and decoration project shall meet the requirements that the full-time safety management personnel of the project shall meet according to the construction area . The following statement is correct: ( ).

A, projects below 10,000 square meters should not be less than 2 people

B, projects above 10,000 to 50,000 square meters should not be less than 2 people

C, projects above 10,000 to 50,000 square meters should not be less than 3 people

D, projects above 50,000 square meters should not be less than 5 people

8. According to the "Hyper Safety Management Regulations of Construction Projects", the general contractor shall complete the construction of the construction project ( ) on its own.

A, overall structure

B, main structure

C, all structure

D, main structure

D, main structure

Answer: D

9. The main purpose of formulating the "Regulations on Safety Management of Construction Projects" is ().

A, formulate scoring methods to facilitate industry management

B, strengthen construction safety supervision and management, protect people's lives and property

C, realize effective security management with minimal security investment

D, establish a unified judicial interpretation, help the execution of legal procedures

Answer: B

10. According to the provisions of the "Construction Law", house demolition shall be undertaken by the construction unit that meets the conditions for ensuring safety, and () shall be responsible for safety.

A. The person in charge of the construction unit

B. Full-time safety production management personnel

C. Project manager

D. The person in charge of the construction unit

Answer: A

11. The following is a major accident ().

A.3 deaths

B.10 serious injuries

C.10 million yuan more than 50 million yuan direct economic losses

D.20 minor injuries

D.20 minor injuries

Answer: The promulgation and implementation of C

12. () marks that safe production has become the focus of my country's construction industry work at this stage, and the safe production system has been established as a fundamental system to promote the development of my country's construction industry.

A. "Construction Law"

B. " Production Safety Law "

C. "Construction Project Safety Management Regulations"

D. " Construction Project Quality Management Regulations "

Answer: C

13. "Construction Safety Law" The safety facilities of production and operation units in newly built, renovated, and expanded projects must be with the main project ( ), and investment in safety facilities shall be included in the construction project estimate.

A. Design, construction, and production and use

B. Procurement, construction and production and use

C. Procurement, design, production and use

D. Design, procurement, construction and construction simultaneously at the same time

D. Design, procurement and construction simultaneously at the same time

Analysis: The safety facilities of the production and operation units for new construction, reconstruction and expansion projects must be designed, constructed at the same time, and put into production and use at the same time as the main project. Investment in safety facilities should be included in the construction project budget.

Answer: A

14. When there are multiple tower cranes operating on the construction site, ( ) should organize the formulation and implementation of safety measures to prevent tower cranes from colliding with each other.

A.Climbing machinery installation unit

B. Construction general contractor

C. Climbing machinery user unit

D. Supervision unit

Analysis: When it is found that there are multiple tower cranes working on the construction site, Construction general contractor unit shall organize the formulation and implementation of safety measures to prevent tower cranes from colliding with each other.

Answer: B

15. ( ) Safety inspections should be carried out at the construction site every day, and the implementation of special safety construction plans for sub-projects with high risk is carried out on site.

A. Project leader

B. Main person in charge

C. Project full-time safety production management personnel

D. Enterprise leader

Analysis: Full-time safety production management personnel should conduct safety inspections at the construction site every day, and supervise the implementation of special safety construction plans for sub-projects with high risk on-site supervision.

Answer: C

0 The above is all the content brought by the editor. Follow the editor to learn more about security personnel~