computer is turned on, there are always many problems. Sometimes the screen is blue, sometimes the screen is black, and a lot of English letters pop up. Most people are basically helpless when encountering such a situation and don’t know how to solve it. Today I will give you some examples of common boot problems and explain their solutions. After reading them carefully, I will definitely use them next time.
1. The screen is black on the boot, and there are only two lines of English
. This situation indicates that the computer cannot find the boot boot. There are two possibilities: one is that the system boot is damaged or lost, and the other is that the motherboard cannot recognize the hard disk.
When encountering this situation, we need to turn on the computer and press del to enter the BIOS to view the hard disk information. If the hard disk information exists, it can be determined that the system boot is missing or damaged. You can use PE to repair and boot, or you can directly reinstall the system to solve the problem. If the hard disk information does not exist, the hard disk information is not seen in the BIOS. Turn off the power supply, plug in the hard disk and change the SATA port (motherboard end), or change the SATA cable, and then enter the BIOS. If you still can't see the hard disk information, you can basically confirm that the hard disk is broken. Please replace the hard disk.
2. Turn on the computer to display that a certain system file is lost or corrupted
Go to the computer of the same system to find the file, copy the file to the USB flash drive, and then enter PE mode and copy the file to the specified directory on your computer. The second method is to directly reinstall the system.
3. There are many reasons for turning on the computer to blue screen
. The error codes that are not used represent different reasons. But only the blue screen like 0x0000007B error code can be solved in the following way.
When you encounter this situation, enter BIOS to change the hard disk mode to IDE (this blue screen is caused by hard disk compatibility issues), press the del key to enter BIOS when you turn on the computer. Find the relevant settings and change the hard disk mode to IDE. Press F10, save the changes and exit, select "OK" in the pop-up window, press Enter, and wait for the computer to restart.
When you encounter the above three situations when you start the computer, you can try to use the corresponding solution. If you can't solve it, you have to find help from professionals.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-