Italian Bassocontinuo advanced rack Italian BAS rack using HDF Plus board! A good rack must have both appearance and core. BAS believes that a good audio rack should have a unique appearance, excellent acoustic design, rigorous material selection and meticulous manufacturing tech

Italian Bassocontinuo advanced rack Italian BAS rack using HDF Plus plate! A good rack must have both appearance and core. BAS believes that a good audio rack should have a unique appearance, excellent acoustic design, rigorous material selection and meticulous manufacturing technology.

They found HDF Plus reinforced high-density sheets that had never been used in audio products and used them to produce laminates for a variety of audio racks, including the flagship Ultimate Line. HDF Plus is 40% denser than HDF board, has uniform damping characteristics, and has better resonance control.

BAS uses single-axis and three-axis accelerometers on up to 52 sampling points for testing, accurately measuring the lateral deformation of each shelf of the rack, and then simulating ground vibrators to vibrate at various amplitudes and frequencies. , test the impact of vibration force on the frame structure.

BAS records various parameters such as projection rate in detail. After mastering a large amount of measured data, BAS can improve the structure and material application of the rack in a targeted manner. It is found that at lower frequencies (the frequency with the most significant impact) Make the best optimization plan and apply appropriate damping blocks or dampers as needed.

Ultimate Line audio rack is made of this extremely high-density HDF Plus reinforced high-density board. The density is 40% higher than that of HDF board, which means that the layer board is harder, the kinetic energy internal consumption is better, and the weight is heavier. The whole set The rack weighs 156 kilograms, perfectly interpreting the ultimate concept.

Moreover, the top and bottom layers are made of plates and aluminum alloy plates to form a "sandwich" structure to achieve better damping and vibration isolation characteristics. The bottom of the top layer is embedded with a damper weighing 11.5 kilograms, and the top plate adopts an isolated "sandwich" sub-top plate design.

uses a variety of damping technologies and materials to achieve broadband anti-seismic effects. It is very suitable for supporting precision vinyl turntables, CD players, preamplifiers and other sound source equipment that are particularly sensitive to vibration.