Netizens say I’m not bullying. Last year, iPhone 12 was released, and they all said they would not buy it because of 13 fragrances!
I listened to the persuasion of netizens and waited for the release of 13 and found that it was delicious!
However, this time it is not iPhone 13 , but Switch 13.0.0 system.
The two were released on the same day, which is also a special encounter [face cover] 10.0 p10.0 Where is the incense? Today, I will take everyone to study it carefully!
waited four years
NS had never been seen in the just released,Everyone always has one or two wired headsets in hand, so the problem of NS not supporting Bluetooth headsets has been confused. But today, 4 years later, I believe that many small partners don’t know where they lost their wired headsets .
So let NS support Bluetooth headsets, which has become an extremely important requirement. Players are not open to Nintendo strongspan1 span5 strongspan1 span5span strongspan5 _span strongspan 5span5span strongspan _span strongspan 5 The grievances [狗头]
In fact, NS has its own Bluetooth 4.1 and Bluetooth Pro connected to Joy-Con.
But because 2.4G Wi-Fi will interfere with the Bluetooth signal ,In order to ensure the normal operation of everyone's games, Nintendo tried its best to avoid disconnecting the handle halfway through the game. This disgusting thing happened, so it has not opened the Bluetooth audio function.
Although Bluetooth is supported after this update, it is also limited. When connecting Bluetooth headsets and speakers, can only connect to a maximum of 2 wireless controllers . Just one Joy-Con side, A pair of Joy-Con occupies two places . So when playing, only can wirelessly connect a pair of Joy-Con or two Pro handles .
If you want to use Bluetooth audio and more than two controllers at the same time, you can only choose to make the Pro controller wired to NS .
delay is inevitable
own limitations because Bluetooth technology, the sound quality does not need to consider the nature, The delay is also bound to exist .
But the problem of delay actually involves two aspects.
Just like some players are not sensitive to the number of frames, we everyone has different sensitivity to audio . Under the same delay, some people think it is impossible to play, and some people think it's not bad.
On the other hand,It's the headset itself. NS's Bluetooth audio connection only supports the most basic SBC protocol , the delay of different headphones is different.
Based on the principle of " you get what you pay for _span strong”, combined with the test results of 59 _strong5span strong headphones in general The latency of high-end headphones will be lower .
recommended headset _p1span5 p1span0 What is the official Nintendo headset?
In the demo picture on the official website, although the headphone model is coded, it is still obvious that it is AirPods Pro _span5_strong_span img img br br br br brspan9 br br brspan5
In our test, AirPods Pro's latency is indeed very low , most games will not have obvious discomfort when playing.
But maybe Pro needs to process noise reduction or some other data, so is not as good as AirPods 1st and 2nd generation _span5 _strong64 strong64.
If you want to buy a headset for the Switch and don't have the need for noise reduction and other functions, it is a good choice to spend a few hundred yuan to buy an AirPods 2 generation.
If you think earphone own hand low latency, welcome in the comments area to small partners Amway some ~
What should I do if I can’t find it?
Because 2.4G Wi-Fi will interfere with Bluetooth,And the signal of NS itself is quite bad , so it is easy to find that the Bluetooth headset cannot be searched, or half of the headset is disconnected.
It is recommended that when NS connect to Wi-Fi, should choose 5G Wi-Fi as much as possible . If you can't find 5G Wi-Fi, you can change the 5G frequency band to 149 on the router (not supported by too old routers).
If the router is set to 2.4G/5G combo, you can check whether your connected Wi-Fi frequency is 2.4GHz or 5GHz in the [Internet] setting of NS. This feature is also added in this update oh ~
not be JS pit
Before this update,A large number of USB Bluetooth audio transmitters have already appeared on the market. However, this wave of updates of the old Ren is equivalent to directly cut their fortune directly.
So as soon as this feature was updated yesterday, there were a lot of JS discredited and said how high the latency is.
Of course, if your headset supports Qualcomm 5span strong_span 5 It can be done lower . But if only SBC is supported, the Bluetooth audio that comes with the system will be more suitable for you.
I suggest you still try it yourself ,Connect with the Bluetooth headset at hand to see if the delay can be accepted, don’t be fooled by JS~
_span1 span1 new span_span1 _span1 span_p0 It's so explosive that everyone ignores the base upgrade function.
However, it is normal to ignore it. After all, is currently useless . Because of our NS base, does not support firmware upgrade .
The new base firmware update function added this time is specifically for the new base of NS OLED, the new NS _strong 64It is designed with a base with LAN wired network interface.
So why does such a dumb base need a firmware update? We have been playing with the docking station for 4 years, and we haven't seen any bugs?
If you want NS to support more peripherals, you can let the host system support it. Anyway, it's all USB protocol, there is no need to design a firmware update function for the base. .
Logically speaking, this function is more for the information exchange between the host and the base. To put it simply, allows the host and the base to recognize each other and identify the model inserted into the machine .
At present, there are only 3 kinds of machines that support the base: the old NS, the battery life version NS, NS OLED.
Isn’t it enough for Nintendo to write all three models in it?
From this perspective,The intention of the base firmware update is actually very obvious: In addition to the three known NS models, Nintendo will have a high probability of launching a new model of NS in the future, and at least will be compatible with OLED The new base .
As for whether this "Schrodinger NS" is there, what will it look like if there is, and whether it will support 4K like the previous rumors. After the NS OLED is officially released, we may be able to be on the base Some clues were found in the hardware chip of the company.
In addition, this update also added some new small features.
For example, in the options of handle joystick calibration , originally pressing the joystick to start the calibration, changed it to the long push joystick. Some special controllers such as fighting joysticks and audio game consoles can now also be calibrated in NS~
combined with the rumors that today’s N64 games will be added to the free game library,As well as the FCC's new controller certification, it seems that the probability of N64 is really great! (Because the N64 controller does not have the function of pressing the joystick)
I use from the wired network of strong. Take it out of the dock, the body of is warm . This is because when wired networking, the machine maintains the network connection throughout the entire process, even if it is on standby.
After this update, a manual switch has been added. If you turn it off, even if it is wired to the Internet, the machine will intermittently connect to the Internet to reduce power consumption (Nintendo is also very environmentally friendly [狗头]).
NS has gone through 12 major version updates so far, but there are still a lot of missing features. folder , theme these players have long been waiting for features,It has not yet been installed. I really don’t understand whether Lao Ren is lazy or likes to squeeze toothpaste [cover face]
After the 13.0 "epic" system update adds Bluetooth, we look forward to everyone strong59 spanstrong Which features can be added in the future?
.