The gap of the steering wheel will gradually increase during the daily use of the vehicle. This is because the wear of the steering gear rack and the wear of the connecting parts of the suspension creates a larger gap, so that the steering wheel has to be rotated through a relatively large angle to allow the vehicle to adjust the direction or turn. The steering gear gap will reduce the vehicle's maneuverability, which is caused by the following reasons:
Fault one: steering gear failure.
Solution: When the steering wheel of the vehicle has too large a gap, most of the reasons are due to the long kilometers used, resulting in a certain amount of rack wear and gaps, which will cause a larger angle to be turned when the steering wheel is turned. Adjust the direction of the body. Generally, there is no way to adjust the gap of the steering gear. It is necessary to replace the steering gear to solve it. After the warranty period, the price of replacing the steering gear assembly accessories at the 4S shop is about 15,000~18,000 yuan, and the labor cost is 2000~3000 yuan.
failure two: tie rod ball head failure.
Solution: After raising the vehicle with the lift , check whether the left and right tie rods of the vehicle are worn out and there is a certain amount of openness, which will cause the steering wheel gap to be too large. It is about 600~800 yuan to replace the tie rod head parts in the 4S shop, and the labor cost is about 200~400 yuan.
Fault 3: Steering column cross shaft fault.
Solution: You need to go to the after-sales service and ask the after-sales personnel to help check whether the steering column cross shaft bearing is worn or damaged.It will cause a certain gap in the steering wheel, the price of accessories is about 400-600 yuan, and the labor cost is 300-500 yuan.
The above is a solution to a large steering gear gap failure, for reference by netizens.
.
