AION V was loved by young ladies and some dads as soon as it was launched because of the appearance of this car and its space. Moreover, the current surge in oil prices has made new tram energy very popular. However, after buying a car, many people cannot install charging piles for some reasons. So are they allowed to go to the charging station to charge? No, now new energy vehicles can use portable charger , which can be directly plugged into the socket and can be charged anytime, anywhere. But there are many portable chargers on the market. Everyone doesn’t know how to choose. The
Aion V pure electric car has a maximum range of 702KM, which can meet people’s daily needs. 5 versions: 71.8KWh, 69.9KWh, 72.3KWH, 80KWH and 95.8KWH. Today, the editor will introduce the use method and charging time of Aion V (parameters | inquiry) using the industry benchmark Puno.
Method 1: Use Punode 16A3.3KW car charging
This car charging is a relatively common one on the market. You can directly plug in the 16A air conditioner socket at home to charge. Common sockets at home are generally 10A and 16A sockets . 10A sockets are generally plugged in electrical appliances with relatively small power at home, such as TVs, water dispensers, etc. 10A sockets are generally five-holes; 16A sockets are plugged in electrical appliances with relatively large power, such as air conditioners and refrigerators, etc. It can be seen from the above figure that the socket hole of 16A is larger than the socket hole of 10A.
like new energy vehicle charger belongs to high-power charger , so you need to plug in 16A three-hole socket to use. If you often charge in a fixed place, such as in some places such as companies, if there is no 16A socket, it is recommended to install one directly. The installation method of 16A socket is also very simple. If the wires in the socket are 2.5 square meters, you can use the 16A3.5KW charger.
If there is a 10A socket, you can also remove the 10A socket panel to see if the wires inside are 2.5 square meters. You can remove it and replace it with a 16A socket panel.
uses Punode 16A3.5KW to charge the AION V on the vehicle, and can charge 3.5 kW in one hour. Battery capacity 71.8KWH requires 71.8KWH ÷ 3.5KW = 20.5H
Battery capacity 69.9KWh full charge requires 69.9KWH ÷ 3.5KW = 19.9h
Battery capacity 72.3KWH full charge requires 72.3KWh ÷ 3.5KW = 20.6h
Battery capacity 80KWh full charge requires: 80KWH ÷ 3.5KW = 22.8h
Battery capacity 95.8KWH full charge requires 95.8KWH ÷ 3.5KW = 27.3h
The actual charging time will not be greater than the calculation time, because the car battery is redundant and will not completely drain dry.
This charger also offers a 10A adapter. If you don’t find a 16A socket when you go out, you can change the adapter and plug it into the ordinary three-hole socket to charge. Note: When using the 10A adapter, you must adjust the current to below 8A.
? Car owners may ask, is there anyone charging faster than 16A3.5KW?
answer is yes. The fastest charging power of AION V is 220V32A7KW, which means the fastest charging of 7 kW per hour. However, the largest common household socket is 16A, and the wires inside the socket are generally 4 square meters or less. The current of 32A must not be less than 6 square meters.
So if you want to speed faster and reach a charging speed of 32A7KW, you need to directly connect the 3-core 6-square wire from the meter and connect it to the 32A dedicated socket.
Method 2. Punode 16A3.5KW and 32A7KW dual-purpose charger
Next, I will introduce the Punode 16A3.5KW and 32A7KW dual-purpose charger. This charger comes with 16A and 32A connectors.
When using a 32A connector, a special 32A socket needs to be installed. The installation method of this socket is also very simple. Just connect a 3-core 6-square wire from the meter to the socket.
When using a 32A connector, a special socket is required, and the maximum charging power is 7KW. We can install this socket in the company, hometown, and factory where you often go, and you can install it.When using the 32A connector, charge 7 kW in one hour. The battery capacity is 71.8KWH and fully charge requires 71.8KWH ÷ 3.5KW = 20.5H
Battery capacity is 69.9KWh fully charge requires 69.9KWH ÷ 7KW = 9.8h
Battery capacity is 72.3KWH fully charge requires 72.3KWh ÷ 7KW = 1 0.3h
Battery capacity 80KWh full charge requires: 80KWH÷7KW=11.4h
Battery capacity 95.8KWH full charge requires 95.8KWH÷7KW=13.6h
The speed is obviously faster when using the 32A connector. This charger is the same as the household charging pile.
If you go out and go to a strange place, there is no place to install a 32A dedicated socket. You only need to replace the 16A connector and plug it into the 16A air conditioner socket to use it, which can reach a maximum speed of 3.5KW. It's equivalent to a car-on charger.
Use the 16A connector to charge 3.5 kW in one hour. The battery capacity is 71.8KWH and it takes 71.8KWH to fully charge 71.8KWH ÷ 3.5KW = 20.5H
Battery capacity is 69.9KWh fully charge 69.9KWH ÷ 3.5KW = 19.9h
Battery capacity is 72.3KWH fully charge 72.3KWh ÷ 3.5KW = 20.6h
Battery capacity 80KWh full charge requires: 80KWH ÷ 3.5KW = 22.8h
Battery capacity 95.8KWH full charge requires 95.8KWH ÷ 3.5KW = 27.3h
This charger is both a charging pile and a car charger. If you are going out, you can only find a 10A ordinary socket, and you can also use the socket adapter to plug it into the 10A ordinary socket directly. Similarly, when using an adapter to plug into a normal socket, the charger current needs to be adjusted to 10A or below.
Finally, I will answer the most common questions asked by car owners. Car owners all know that AION v’s automatic driving function is good, but they don’t know how to turn it on. The following editor will share with you how to turn it on the automatic driving function?
First look at the shortcut keys on the steering wheel, the buttons on the lower right corner on the left, that is, the small steering wheel, which is the switch for the automatic driving function. You can set the distance to the car in advance according to your needs, and then use it to turn on the automatic driving with one click.
Can it be started as simple as above? Actually, it is not, because everyone has different usage habits. Before using it, they are set in the system settings to ensure the stable use of autonomous driving.
Open the car machine and find the button set by the system and click in, then switch to the driving assistance, and the personalized settings are clear at a glance. Especially the vertical driving assistance, you need to set it up according to your car, because it is basically all safety assistance, so it is recommended to turn it on, which will provide good safety guarantees for your autonomous driving or normal driving.
front collision warning distance setting is recommended to set to "near". This is more in line with our real road conditions. If the setting is "medium" or "far", the warning sound will sound from a distance. It is not suitable for me to try it in my big city. However, in the past, it is recommended to adjust it to "medium" or "high" in places like suburbs, which are more guaranteed.
The setting of turning the turn signal automatically changing lanes in longitudinal driving assistance is a necessary setting for automatic driving, because this set of L2.5 automatic driving functions mainly free up both feet and turn on the light to automatically change lanes, so the automatic lane change switch must be turned on.
lane assist mode recommended to choose steering and warning, which is more suitable. The series of necessary settings in front of
have been completed, just start the automatic driving with one click by pressing the steering wheel button.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-