I have posted videos of "running lead" before, which refers to the lead running when the traditional line group is matched. It cannot achieve the true "running lead". It is mainly due to the superposition of two factors, which determines that "running lead" cannot run. One is that the main line above the lead sinker has an angle of 90 degrees, which is double overlapped with the upward buoyancy of the float, increasing the friction resistance generated by the 90 degrees angle of the main line when passing through the lead sinker, which leads to the phenomenon that the fish moves with the lead sinker when dragging the hook bait. It is impossible to achieve the effect of "lead running".
Is there a way to achieve the true "lead running"? have! According to the inspiration of a fishing friend, today I will share with you a line group and usage method that can completely achieve lead running.
1. We need to use floats with very small lead, preferably with a long float tail. The theoretically, the smaller the lead, the better.
2, we need to use double lead in the main line, light lead on the upper and heavy lead on the lower. 3. When adjusting the float, first use lead and half water to adjust the float separately. Adjust the full height eye. The float has the same eye as the water surface. Then add lead and add more than 5 grams. If you need to take a long shot, you can add more than 10 grams.
4, the shortest use of the Gemini line, controlled within 10 cm, and it is best to catch small fish even 5 cm. When fishing for medium and large fish, you can use the regular sub-line length.
After meeting the above conditions, the state of the line group in water is: upper lead is suspended from the bottom, lower lead is lying on the bottom, double hooks are lying on the bottom, main line is vertical straight, float can be used as fishing eyes at all. When the bottom of the water is uneven, in the whole eye, fishing at any eye, the state of double hooks at the bottom will not change.
Since the float is used very small, it can be used for about one gram, so the upward traction force of the float itself is very small. In addition, the lead is added to balance most of the buoyancy of the float, so as long as there is a little tension, the float can move downward. The lower lead is heavy lead. When the fish eats the double hook and drags the hook bait, the main line will slide from the center hole of the lower lead. Although the main line also has an angle of 90 degrees at this time, after the buoyancy of the float is balanced, the frictional force will be very small, and it is easy to cause the float to move downward. Therefore, the heavy lead will not be dragged, and the main line will slide from the center hole of the heavy lead, which will also cause the float to appear in the next snuff, jog, or black float and other fish eating signals.
The reason why such line group combination and fishing can have a lead slip effect is mainly because, first, the float eats a small amount of lead and the upward traction force is small. Second, the upper lead balances the buoyancy of most of the floats. Third, the lower lead is very heavy. When the fish drags the hook and bait, it cannot pull the heavy lead with the same pulling force, but it can pull the remaining buoyancy of the float. Therefore, although the main line above the heavy lead has an angle of 90 degrees, after the floating buoyancy force is balanced by the upper lead and most of the buoyancy force is removed, and the remaining buoyancy force is very small, the resistance at the angle of the main line 90 is very small. At this time, the fish drags the hook bait, and the main line can slide through the heavy lead, thereby realizing the lead running in the true sense. Strictly speaking, this is called lead slip, not the so-called "lead running". The combination of the lead-sliding
is different from the traditional "lead running" online group. The difference is that the upper lead on the main line double lead is small lead, and the lower lead is heavy lead. The upper lead balances most of the buoyancy of the float that is the snack lead. This greatly reduces the sliding resistance at the angle of 90 degrees above the main line above the heavy lead. Only when this resistance is reduced can the main line slide through the central hole of heavy lead, thereby driving the float to appear on the action signal.
This video is repeated in detail, so it is easier to understand. If you like to use lead to use lead, compare it and see if the lead you use is the lead to the real sense of lead? If not, then you can use the true meaning of running lead that you shared with you today. Maybe after using it, the fish mouth will be more, which will avoid the loss of fake lead loss, and you will feel that the fish catch has increased significantly.
