Aermet100 High-quality ultra-high-strength martensitic alloy steel Aermet100 alloy related parameters
Aermet100 is an ultra-high-strength martensitic alloy steel with a very hard crystal structure . This steel grade was developed in response to the need for a stronger, tougher material with excellent fracture toughness and ductility. The small tensile strength of this alloy is 280 ksi (1930 MPa).
Given that Aermet100 is not a corrosion resistant alloy, it must be properly sealed if used in wet environments. Excellent hardness, tensile strength, and ductility make this alloy an ideal material for a variety of applications including landing gear, armor, fasteners, actuators, ordnance, jet aircraft, engine shafts, drive shafts, and structural tubing. candidate materials. A-100 high-strength steel can be used in service conditions up to 427°C (800°F).
Aermet100 alloy related parameters
Density: 7.9g/cm3 (0.285lb/in3)
Elastic modulus : 28.2*103KSI
Resistivity: 259.0 ohm-cir-mil/ft（70.0° F)
Advantages of A-100 Alloy
Excellent mechanical properties
• Safety belt and strength
• Excellent ductility and toughness
•High fracture toughness
•Excellent resistance to fatigue and stress corrosion cracking
•High fatigue strength
Related specifications
AMS 6532
UNSK92580
New Materials can provide various forgings, bars, square bars, plates, strips, wires, welding wires , etc. of Aermet100 material, with a diameter range of 20-400mm.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-