SIMATIC S7-1500 and TIA Portal software

The S7-1200 and S7-1500 controllers are the flagship products of the Siemens SIMATIC PLC product family.

S7-1200 positioning is a simple control and stand-alone application. S7-1500 is positioned as high-end factory automation control, suitable for more complex applications, and is the most high-end PLC product of Siemens .

S7-1500 CPU basic control module has four types: standard type, compact type, distributed , process type .

6款标准型CPU 模块

• CPU 1511-1PN
• CPU 1513-1 PN
• CPU 1515-2 PN
• CPU 1516-3 PN/DP
• CPU 1517-3 PN/DP
• CPU 1518-4 PN/DP

【文末免费领取PLC学习资料】

【文末免费领取PLC学习资料】

【文末免费领取PLC学习资料】

2款紧凑型CPU

• CPU 1511C-1 PN
• CPU 1512C-1 PN

2款分布式CPU

• CPU 1510SP-1 PN
• CPU 1512SP-1 PN

5款工艺型CPU

• CPU 1511T(F)-1 PN
• CPU 1511T( F)-1 PN
• CPU 1515T(F)-2 PN 0
• CPU 1516T(F)-3 PN
• CPU 1517T(F)-3 PN

S7-1500 In addition to the basic control module, there are also advanced control modules: ET200 CPU and soft controller.

SIMATIC S7-1500 standard controller

SIMATIC S7-1500 compact controller

【文末免费领取PLC学习资料】

【文末免费领取PLC学习资料】

【文末免费领取PLC学习资料】

中央机架

中央机架最大支持32个模块：CPU + 31个模块，这个比S7 -300 is much more powerful. The rack is in a single-row configuration, with all modules on one rail and connected via U-connectors.

can be expanded through ET 200MP distributed I/O after more than 32 slots.

can only be connected through PROFINET or PROFIBUS for distributed I/O modules. When expanding 1-2 racks.

The number of expandable communication modules CM/CP is up to 4, 6, and 8 depending on the model. The communication modules of S7-1500 mainly include DP, PN, Ethernet .

S7-1500 CPU comes standard with Ethernet port and PROFINET interface.

博途

TIA博途平台包含：

• SIMATIC STEP 7
• SIMATIC WinCC
• SINAMIC Startdrive
• SIMATIC Scout

安装以上三种软件任意一种就会附带安装博途平台，可以把博途平台理解为这三款软件的“ operating system".

Among them, STEP7 is used for PLC program editing , WinCC is used for configuration visualization device , and TIA Portal also integrates Startdrive for drive, SCOUT for motion control, etc.

STEP 7

STEP 7 (TIA Portal) can configure S7-1200, S7-1500, S7-300/400 and WinAC. STEP 7 (TIA Portal) has 2 versions , which can be selected according to the PLC series used:

, STEP 7 Basic for configuring S7-1200

2, STEP 7 Professional for configuring S7-1200, S7- 1500, S7-300/400 and WinAC

[Free PLC learning materials at the end of the text]

[Free PLC learning materials at the end of the text]

[Free PLC learning materials at the end of the text]

WinCC

html The upper computer, WinCC (TIA Portal) includes all the functions of the traditional WinCC, and integrates the function of configuring the touch screen. According to Portal's plan, there will be no separate touch screen configuration software in the future.

Supplement: The commonly used Siemens touch screen programming software is WinCC Flexible 2008 sp4 and WinCC Flexible SMART V3. WinCC flexible SMART V3 is mainly used for SMART V3 series touch screen, WinCC flexible 2008 sp4 is used for touch screen other than SMART V3 series.

Touch screen devices are called SIMATIC panels in Siemens official documents, and the "panel" descriptions in the documents are basically touch screens.

WinCC (TIA Portal) has 4 versions, which version is used and can be selected according to the configured device:

, WinCC Basic, used to configure the compact series touch screen, WinCC Basic will be installed when STEP 7 Basic and STEP 7 Professional are installed. Automatically installed by default, this version should not be available separately.

2, WinCC Comfort for configuring all panels (including Comfort and Mobile)

3, WinCC Advanced for configuring the full range of touchscreens and PCs, single-user sites. The above two versions can only configure the touch screen device, and the advanced version and above can configure the PC station.

4, WinCC Professional, is the highest version of WinCC (TIA Portal), which can configure a full range of touch screens and PCs, single-user sites and SCADA systems. All versions above

are backward compatible, and those with a higher version will automatically have the functions of a lower version.

Startdrive

With Startdrive, the system configuration, parameter setting, debugging and diagnosis of SINAMICS drive equipment (inverter equipment) can be realized on the TIA Portal platform.

Scout

Scout can be used to implement process object configuration, user programming, debugging and diagnosis of SIMOTION motion controllers (servo/stepper devices) on the TIA Portal system platform.