Recently, the Aohi Magcube series launched a new AOC-P002 product for the magnetically absorbed wireless charging mobile power supply. This is a magnetically absorbed charging accessory designed specifically for the iPhone 12/13 series models. It supports magnetically absorbed wireless charging and 20W PD two-way fast charging, and is mainly small and portable fast charging.
product capacity reaches 4000mAh, while the overall size is only 82*60*12.5mm, which is similar to a bank card, and its thickness is less than half the diameter of a one-yuan coin. In addition, the weight is only 109g, which is about 1.5 AirPods Pro, which can be said to be extremely light and thin.
Previously, the charging head network has conducted a detailed evaluation of this product. Let’s disassemble it below to see how the product’s design materials are made so light and thin.
The front of the packaging box is printed with the Aohi brand, product appearance diagram and name - MAGCUBE W4000, which supports 20W PD fast charging and 10W wireless charging.
package contains mobile power , instruction manual and warranty card.
Aohi This wireless charging mobile power supply continues the black body design of the MAGCUBE series products, the shell is matte, the overall size is very small and light, and it looks very elegant.
front center design with Aohi brand logo.
There is a battery breathing light at the edge, which is yellow (0-33%), blue (34-66%), and green (67-100%). The back of
uses an ultra-thin (0.5mm) glass panel, which can fit well with the adsorption mobile phone, and the magnetic wireless charging process is more stable.
has a power button and USB-C interface at the bottom, a yellow glue core, and supports 20W PD bidirectional fast charging.
USB-C port is decorated with metal rings, which looks more refined.
Product name: MAGCUBE W4000 magnetic wireless charging mobile power supply
Model: AOC-P002
Battery capacity: 4000mAh/15.2Wh
Rated capacity : 2100mAh (5V3A)
PD input/output: 5V3A, 9V2.2A
Wireless output: 10W Max
Manufacturer: Shenzhen Aoda Power Supply Technology Co., Ltd.
The length of the mobile power supply body is measured to be 81.84mm.
width is 59.87mm.
thickness is 12.51mm.
size is similar to a bank card.
body thickness is less than half the diameter of a one-yuan coin.
Intuitive feeling when holding it in your hand, small and light.
net weight is about 109g.
Use ChargerLAB POWER-Z KT002 to measure that the USB-C port supports Apple 2.4A, Samsung 5V2A, DCP protocols, as well as QC2.0/3.0, AFC, FCP, PE2.0, PD3.0, and PPS fast charging protocols.
In addition, port C is measured to have three sets of fixed voltage gears: 5V2.4A, 9V2.6A, and 12V2A, and a set of PPS voltage gears: 5-10V2.4A. A list of the usage scenarios of
products can be used to perform magnetic wireless charging on Apple iPhone 13 Pro phones.
Use Aohi to charge iPhone 13 Pro for wired charging. The input power is measured to be 9.12V 2.07A 18.88W through ChargerLAB POWER-Z KM001C.
2. Aohi 20W mobile power disassembly
Remove the glass panel, and the power bank is filled with a lot of black thermal glue to reinforce and heat conduct.
The back of the wireless charging coil is covered with plastic paper, and the magnetic separator and magnet ring are fixed to the black plastic board.
Remove all the battery inside the power bank, wireless charging coil, etc.
light guide plastic and C-port metal decorative ring are both fixed with fixed column hot melt.
magnet ring consists of 16 small arc magnets, and there is also a small square magnet. Two thermistor were welded on the small board of to monitor the temperature of the battery cell and wireless charging coil respectively.
battery cell comes from LS Lishen , and is wrapped around insulating tape protection. The battery cell is 64mm long, 54mm wide, 6.4mm thick, and has an average voltage of 3.85V. It is a high-voltage and high-density battery.
Two small PCB boards are stacked and soldered inside the mobile power supply.
The two small boards are filled with thermal glue to dissipate heat.
Weld the solder joints on both sides and split the two small boards apart.
The front of the first small board is equipped with a mobile power main control chip , inductance , lithium battery protection chip, etc. There are multiple filter capacitors, power indicator lights and microcontrollers on the back of
.
USB-C mother seat is fixed through welding and fixed, and an insulating isolation plate is pasted on the metal shell.
power key close-up, patch welding.
Mobile power main control silk screen printing W332 is the IP5332 all-in-one SoC chip of Yingjixin. This chip can support multiple USB ports at the same time, and all support multiple fast charging protocols, integrate bidirectional PD functions, and supports multiple voltage batteries, covering all lithium batteries on the market, with a maximum charging current of 5A, a maximum 18W output, and a built-in battery meter function, a built-in power tube, a small number of peripheral components, maximum simplified design and cost savings. The chip supports NTC temperature detection of lithium batteries, ensuring safe use.
Yingjixin IP5332 information. The charging head network was disassembled and learned that Yingjixin IP5332 was also adopted by dozens of products from brands such as Yisu, aigo, Green Network, RAVPOWER, and Bonks, and has been highly recognized by the market.
silk-print H269A chip is used for power indicator light driving.
Two Saixin Micro XB7608 all-in-one lithium battery protection chip, built-in 14.5mΩ resistance MOS tube, only one capacitor is required for peripheral components, which supports overheating protection, overcharge protection, overdischarge protection and short circuit protection. It integrates high-precision voltage detection and ultra-low quiescent current.
thermistor close-up.
Another small board is equipped with a wireless charging main control chip and NPO resonant capacitor.
The other side is equipped with an op amp and two coil drive tubes.
wireless charging master chip uses Yingjixin IP6808. This is a wireless charging transmitter control SoC chip, compatible with the latest WPC Qi V1.2.4 standard, supports A11 coil, supports 5W, Apple 7.5W, and Samsung 10W wireless charging. The IP6808 integrates a full-bridge driver circuit and a voltage and current two-channel ASK communication demodulation module, which has a high degree of integration, effectively helping to reduce the solution size and BOM cost.
Yingjixin IP6808 data information.
charging head network disassembled and learned that wireless charging products using Yingjixin IP6808 include TEGIC 8000mAh wireless charging mobile power supply, Maipao POP CANDLE multi-purpose wireless power supply, Qiaoyou 6500mAh EasyGi magnetic energy wireless power supply, omnicharge OMNIMOBILE 12800 PRO mobile power supply, Momis Q.POWER Plug three-in-one charger, etc. In addition, Yingjixin's wireless charging and fast charging chips have been adopted by dozens of products.
LM321 single op amp.
coil drive MOS tube adopts AGMSEMI AGM311MAP, with a voltage withstand voltage of 30V, a resistance of 10.5mΩ, and a DFN3.3*3.3 package.
NPO resonant capacitor close-up.
Another thermistor close-up. All
have been disassembled, let’s take a family photo.
Charging head network disassembly summary
Aohi MAGCUBE W4000 magnetic wireless charging mobile power supply continues the exquisite appearance design tradition of this series of products, very small and elegant, the USB-C port is decorated with metal rings and is equipped with three-color power breathing indicator lights. The product is very light and thin, with an ultra-thin glossy glass panel design on the back, which has a stronger suction force and supports iPhone 12/13 series models with a shell magnetic charging, which is very convenient.
is also very small and exquisite, not only beautiful and comfortable to use, but also does not block the hands or the lens. It is more natural to play games and take photos while charging magnetically. The product not only supports
charging head network learned through disassembly that a large amount of thermal glue is filled with inside the product to help dissipate heat, and at the same time, the battery cell and coil are equipped with a thermistor for temperature monitoring to ensure that low-temperature charging does not damage the mobile phone.
In order to achieve the ultimate compactness, the power bank adopts the well-known brand Lishen high-voltage platform high-energy density cobalt formula battery cell, and also adopts a stacking design of two small boards to make use of the internal space as much as possible. In addition, the Yingjixin IP5332 all-in-one SOC chip and IP6808 wireless charging solution are adopted, and the integration is very high. The required circuit board is very small, which also effectively helps the power bank to achieve miniaturization. In general, the product materials are very reliable.
It is worth mentioning that the charging head network has also disassembled the Aohi Magcube series 65W PD fast charging gallium nitride charger, mini 30W gallium nitride charger, mini 20W PD fast charging charger and other products. Welcome to check it out.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-