A while ago, Jianlu launched a lot of new products. Among them, a three-mode wireless mechanical keyboard with the model RS2 is really eye-catching. The structure adopts the most popular Gasket structure at the moment. The layout is a 98-key layout with some minor changes. A popular volume knob is added to the upper right corner. In addition to these popular elements, there are many small details that cannot be seen directly. Let me tell you the details.
keyboard outer packaging adopts the packaging method of the world cover, and the keyboard name is "TENACITY", which is literally translated as: toughness and perseverance. I personally think this word is quite similar to the tone of the Jiantu brand itself.
accessories are actually not many: metal shaft puller, plastic key puller, L-type TYPE-C plug data cable in the same color as the keyboard, and manual. What’s more interesting is the keyboard protection bag, which also has a simple instruction manual printed on it. The key layout of
RS2 is different from that of common ratings. It is equivalent to shifting the small number area on the right side of the 98 rating to the right by about 1U. At this extra position in the middle, three 1U-length function keys are set, and the 2U-length numeric 0 keys are perfectly retained. At the same time, a knob was added to the upper right corner of the keyboard, reducing two function keys, with a total of 99 buttons + 1 knob.
RS2 three-mode mechanical keyboard original gray color scheme is a retro gray theme. Because the direction area is slightly moved downward and the multimedia knob in the upper right corner, the overall border is not particularly narrow. The key combination function icon is printed on the key cap, which is almost no difficulty in getting started. It also supports Win/Mac dual system shortcut keys, which can quickly switch between two systems through key combinations. The position of the
Del key is relatively close to the position of the regular 104/108 key. I personally like this design. I think the other Pause and ScrLk function keys are almost never used.
three indicator lights are centrally set in the area empty after moving the digital area right.
The outer layer of the volume knob is metal material, and it has a weak sense of scale when rotating, moderate damping, and a pretty good feel.
There is a styling design on both sides of the upper cover of the keyboard, and the overall look will not be too monotonous.
is located on the front right side of the brand logo.
TYPE-C interface and wireless switch are both set on the back side of the keyboard, and the press switch blind operation is also very convenient. The bottom shell of the
keyboard is relatively simple, with five anti-slip pads in total, and in the middle is the nameplate sticker.
2.4G wireless receiver storage compartment is above the sticker, with a non-magnetic design, with high mold accuracy, and the receiver is stuck tightly after putting it in.
Two-stage footrests can provide three different inclination angles.
RS2 comes standard with a set of PBT two-color keycaps, with a closed-mouth character process, and the surface is very delicate and the touch is very warm. There are almost no burrs and water nozzle marks on the back, and there is no obvious deformation of the large key position, and the overall process level is pretty good.
My RS2 three-mode mechanical keyboard is equipped with a Jiadalong G-Red Pro shaft body. Although there is no dustproof wall, the axis stability is still OK. There was no obvious noise during the operation, and the smoothness was OK.
Except for the space bar that has a little noise, I added a little grease to adjust it, the other large keys basically meet the standards for use. What is more considerate about
is that the FR4 fiberglass positioning board of RS2 is marked with corresponding key characters at each key position, so it is very convenient to install after replacing the key cap.
PCB is compatible with five-leg shafts, and you can see the bottom shaft pads.
keyboard adopts a Gasket structure. In addition to the under-axis pads, sound silencer cotton is also added between the FR4 positioning board and the PCB, so that while obtaining a soft and elastic feel, it also has a good sound silencer effect.However, the keyboard does not seem to have a bottom cotton, otherwise the cavity sound will be eliminated more thoroughly.
keyboard backlight is a monochrome warm white light with 17 built-in lighting effects. However, because the keycaps are not translucent and the black positioning board reflects the light in an average way, the overall brightness is not particularly high, so it can only roughly present a simple ambient light effect.
keyboard has a built-in 3000mAh lithium battery. According to official publicity, the battery life can reach about 4 weeks, which should be the best transmission state under the lights turned off. Turning on the light will shorten a lot, and you need to remember to charge it in time. I have many metal items and wireless devices on the desktop. The keyboard has been used for a while and there is no sudden delay or disconnection. The wireless stability is pretty good.
In general, the Jianlu RS2 three-mode mechanical keyboard is a relatively cheap three-mode Gasket structure finished keyboard. This allows everyone to spend less money to experience the more popular customized elements, and it can be seen that they have spent a lot of effort on all aspects. Only the single-color white light seems a little regretful, but overall it is still a mass-produced keyboard with relatively high cost performance.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-