Small and reasonable price, Comet's new M-type 50Ω simulation load "CDL-5500 m" ML8 August 31, 2022 announced that it will be released from late August and the price is reasonable M type 50Ω simulation load "CDL-5500 M" . The rated input power is 35W continuous (250W: 5 seconds), and the SWR characteristics of DC to 300MHz are below 1.2. It is hoped that the retail price (including tax) is 6380 yen ( RMB: 314.8 yuan ).
's new product "CDL-5500M"
Comet Line "CAA-500MARKI" of the antenna analyzer, but the measurement side of the signal does not have installed fake loads that can be installed. Essence In this context, this time at a reasonable price , 35W rated input, 250W PEP (5 seconds) M-shaped 50Ω fake load "CDL-5500M" was released.
, from the company's description:
fake "CDL-5500M" newly released introduction
will start the launch of a compact M-shaped M-shaped 50Ω fake load "CDL-5500M "" ". The antenna analyzer as a product has never been pushed forward.
The maximum output power of the high output short -wave device of the manufacturer is 200W, and the input resistance is set to 250W (PEP) to match the maximum output, making it possible to use the instant SWR measurement. This connector is a general M -type male in the HF frequency band. We use environmentally friendly simple packaging to sell at reasonable prices (5800 yen+tax ).
rated parameter
・ Frequency range: dc ~ 300MHzTML0 ・ Resistance: 50Ω
・ Rated power: 35 (continuous)/250 watts (5 seconds)
・ vswr: DC ~ 150MHz 1.1, 151 ～ 300MHz 1.2
・ Connection: M Type (inch, millimeter)
CDL-5500M contains packaging
for the antenna analyzer "CAA-500MARKI" measured side M-type connecter ( Charity of millimeters). SWR Bobby features DC 144MHz: 1.1 about , 300MHz: 1.2 about , 430MHz: below 1.5, which can fully meet the measurement of measurement.
coml6coml6coml6coml6coml6coml6coml6coml6coml6coml6coml6coml6Comet CAA-500 MK2 antenna analyzer
High-precision simulation acupuncture also displays SWR and resistance at the same time. Anti -resistance.
full -color TFT LCD display provides graphics and digital SWR and R and X values.
特征：
自动扫描模式
在LCD显示屏上自动绘制SWR图形。 Select any preset amateur frequency range and press the scan button ... After the SWR chart is completed for about 30 seconds.
manual scanning mode
selects band , manually set the required band width, and then manually scan the selected frequency range.
multi -manual Sweeps
If you want to adjust the length, position, ground height, gamma matching adjustment, etc., you can overlap multiple manual scan results with 5 different colors! Immediately draw and accurately understand the situation after each adjustment. TML90DBM 1 mw
measurement SWR range: analog instrument 1.0 -6.0: 1, LCD display 1.0-9.9: 1
impedance measurement: 12.5-300 ohm
Electric range: 0-500 ohm (absolute value) 1.8 -190MHz
battery indicator and optional automatic shutdown timer
use six AA alkaline battery or nickel -hydride battery (Excluding) The persistent chief of continuous operation is 9 hours, or the external 8-16VDC 200mA power supply (including DC cable )
can be used when using a nickel-metalized battery. Size: 3.5 x 7.75 x 2.65 inches (overall)
weight: 2 pounds 2 ounces, installation of alkaline battery
source: Hamlife.jp
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-