Water is the source of life. Today’s drinking water environment is getting worse and worse. Large particles such as sediment and rust are often found in tap water. In order to improve the quality of tap water, many people will consider installing the pre-filter at home. However, many people in the market are biased against pre-filters. So, are pre-filters worth investing in? Is it necessary to install it?
In daily life, we use water every day to brush our teeth, wash our face, wash vegetables and fruits, etc. Is the domestic water that the human body comes into direct contact with really clean? At this stage, it is difficult to worry about the quality of water entering the home. Sometimes it is impossible to avoid unexpected impurities caused by some pipes or aging. Over time, the water-related electrical appliances in the home are bound to be affected to a certain extent. The pre-filter is a reliable impurity filtration device that can filter out particulate impurities above 40 microns, restoring the water quality to the factory standard of tap water, and playing a protective role for back-end equipment. Moreover, the current front-end filter is very cost-effective, and it is easy to operate without changing the filter element. Personally, I suggest that it is still necessary to install it.
The tap water
pre-filter is a coarse filtration device, suitable for whole house water purification . It usually needs to be installed behind the water meter in the water inlet pipe. It can coarsely filter 40 micron large particle impurities such as sediment, rust, insect eggs, etc. This can ensure that a large amount of impurities will not enter and cause harm to the human body, and can also play a protective role in faucets, water heaters, etc. For example, after the pre-filter is installed, the filter element must be replaced frequently. The efficiency can be slowed down, and the service life of water heaters, smart toilets, etc. can be extended. This kind of essential
home appliance
is very suitable for households with poor water quality. However, there are many brands of pre-filters on the market, with large price gaps and uneven quality. So, how to choose a cost-effective pre-filter?
Whilton pre-filter
We use the Wilton smart pre-filter P0063 at home. Its filter material is food-grade 316L stainless steel, which is safe and corrosion-resistant, and has a lifetime core-replacement-free design. The large flux design of 6T/h has fast water discharge speed and is ready to be filtered and used, which is enough to meet the water needs of the whole house. It can realize scheduled automatic flushing. There are four modes: 7 days, 15 days, 30 days, and immediate cleaning. It can be set by touch to automatically flush at scheduled times, so you no longer have to worry about forgetting to clean. The internal flushing method of the machine has a built-in 360-degree reverse spray cleaning structure + two-way magic scraper, which rinses everything from the filter screen to the filter bottle.
Pre-filter installation
Although the pre-filter cannot achieve the direct drinking effect, cannot soften hard water, and has no function of regulating water temperature, it can intercept large impurities in the water very well. You don’t have to worry about the impurities in the water causing the risk of clogging the washing machine and dishwasher at home. It can also reduce the workload of other water purification equipment at home and extend the service life of the filter element. In addition, the front-end water purifier has many advantages. It is small in size, does not take up space, is easy to install, and more importantly, has a favorable price.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-