1. What are the solar terms of wall-mounted boiler ?
1. Don’t switch it on and off frequently
When there is no one at home, many people will choose to turn off the wall-hung boiler, and then turn it on to adjust the temperature when needed. In fact, this does not save energy, but will waste natural gas. When the wall-hung boiler is used in summer, it will cause waste. When used in winter, the outdoor and indoor temperatures vary greatly. The wall-hung boiler needs a certain amount of time to heat up when it is started. Frequent switching will cause waste and is not conducive to the heating effect of the wall-hung boiler.
2. Rationalization of indoor temperature settings
Generally, the indoor temperature is most comfortable when it is set around 18-22℃. There is no need to turn off the wall-mounted boiler when there is no one at home during the day. You only need to adjust the temperature to the lowest level, and then increase the temperature when you get home. This can make the indoor temperature more balanced and will not damage the wall-mounted boiler.
3. Regular cleaning and maintenance
The wall-mounted boiler should be cleaned regularly during long-term use. After long-term use, some scale will condense inside the machine and form some carbon deposits. Failure to clean will reduce the efficiency of the machine and shorten the service life of the machine.
4. Adjust the water temperature balance
The water temperature should not be set too high. When using hot water for daily bathing, the summer temperature should be set at about 37°C, and the bathing temperature in winter should be set at about 42°C. The water temperature can be adjusted to the middle temperature, not too low or too high, and the water temperature should be kept balanced. When the water temperature is adjusted too high, scale is easily generated, and scale greatly affects the heat exchange efficiency of the machine.
Do daily maintenance. After the wall-hung boiler at home is used for a period of time, scale will occur. The accumulation of scale will affect the thermal efficiency and lifespan of the wall-hung boiler. Therefore, after using it for a period of time, we need to perform descaling and maintenance of the wall-mounted boiler. If necessary, professional maintenance personnel are required to perform it.
5. Use thermostat to adjust the temperature
Try to use a thermostat. The temperature control system inside the wall-mounted boiler can adjust the temperature, but it cannot detect and control the indoor temperature. In this case, you can control the room temperature based on your own feelings. After installing the thermostat, the room temperature can be accurately preset to achieve optimal operation of the wall-hung boiler and reduce the energy consumption of the wall-hung boiler.
2. How to save water in wall-mounted boilers?
1, The hot water faucet slowly opens to the maximum
There is a delay process of about 7 seconds for the wall-mounted boiler from opening the hot water faucet until hot water flows out. During this process, a large amount of cold water flowing out of the faucet will be wasted. Therefore, when using hot water, you should first turn on a small flow of water, which not only saves water, but also reduces the time for the water to heat up.
2. Cold water storage and reuse
Every time you open the faucet, the cold water flowing out can be stored and used for daily watering of flowers and mopping the floor to avoid waste and thus save water resources.
3. The water temperature setting must be appropriate
Setting the domestic water temperature too high will increase the risk of scale deposition inside the wall-mounted boiler, thereby affecting its heat exchange efficiency. The lower the heat exchange efficiency, the longer it takes to reach the target temperature and the lower the water consumption.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-