Ultra-thin light boxes are mostly used in light and dark environments. Through the contrast of light intensity, the content of the ultra-thin light box is better highlighted, thereby achieving a widespread advertising effect in visual and image communication. The most common ones

ultra-thin light box is mostly used in light and dark environments. Through the contrast of light intensity, the content of ultra-thin light box can be better highlighted, thereby achieving a widespread advertising effect in visual and picture communication. The most common ones are in underground passages or high-speed rail stations, railway stations and underground garages. So, what are the advantages and characteristics of ultra-thin light boxes that enable it to become one of the important means of communication in the advertising industry?

Classification of ultra-thin light boxes

①LED ultra-thin light box;

②Stainless steel ultra-thin light box;

③Aluminum ultra-thin light box;

④Crystal ultra-thin light box/LED crystal light box;

⑤Plastic ultra-thin light box

Features of ultra-thin light box

①Energy saving: Compared with traditional light boxes of the same area Less light sources, saving more than 80% of electricity;

② Environmental protection: more than 95% of materials can be recycled;

③ Ultra-thin: only a quarter of the thickness of traditional light boxes, economical and beautiful;

④ Convenient: It is easy and quick to install and replace light sheets ;

⑤ Uniform light: uniform light, completely flat light output;

⑥ Beautiful: advanced light guide design to ensure that the light sheet is not yellowed by the heat generated by lamp

Installation requirements for ultra-thin light boxes

The first is to formulate an installation plan. Before installing the ultra-thin light box, one thing we must pay attention to is to determine its installation position and formulate an installation plan according to its actual situation;

The second is to measure the precise size. The specific operation method is to have a small installation hole on the back of the light box. According to its The actual position is used to determine the fixed point of the actual installation of the light box;

The third is the fixation of the light box, which is divided into the following four situations:

Ａ. For the wall, it is aluminum-plastic panel, wood Plates, iron plates, etc. can be fixed directly with screws;

B, for general cement walls or brick walls, first use impact drill to drill holes, and then fix them with expansion screws;

C, for wall surfaces with ceramic tiles, marble, glass, etc., you can first Use a glass drill bit to drill through the surface, then drill expansion screw holes, and then fix the light box;

D. For light boxes that need to be hoisted or suspended, after selecting the installation location, determine the fixed point for installing the light box according to the actual size of the light box installation hole, then install the spreader, and connect the ground wire .

The fourth step is to connect the light box. The outlet of the power cord of the general light box is on the back of it, so you can remove the plug of the power cord, wire it directly, and wrap the connector tightly with insulating tape.

Safety instructions for ultra-thin light boxes

When installing or repairing ultra-thin light boxes, care must be taken not to damage the light guide plate . The following super production specifications should be followed:

. During the process of making and transporting the light guide plate, extreme caution should be taken to avoid the light guide plate from breaking. If you need to store the light guide plate for a long time, please place it in a dry, flat, and clean place.

. If there are fingerprints or dust adhering to the surface of the light guide plate and you need to clean the light guide plate, you should wet it with a soft textile and wipe it gently. And wear cotton gloves to prevent any fingerprints and scratches from being left on the surface of the Aixing light guide plate.

. When removing the protective film on the surface of the light guide plate, do not use sharp instruments.

4. The light guide plate needs to be handled with care during installation and pay attention to safety.

If it is an EEFL ultra-thin light box, you don’t have to worry about the light guide plate, because the eefl light box does not have a light guide plate, but you must also pay attention to handling it with care to avoid breaking the light tube.

Ultra-thin light box case

The above is what Yin Xiaomei shared. I hope it will be helpful to you! (The pictures and texts are from Regeneration Era, the copyright belongs to the original author. If there is any infringement, please contact us to delete it)