The growing style children's room is a design method that I have always admired. Since children grow up quickly and change beds quickly, they also have to go through the process of sharing and sharing rooms. The variables are large and the possibilities are right. Fixing the styl

The growing style children's room is a design method that I have always admired. Since children grow up quickly and change beds quickly, they also have to go through the process of sharing and sharing rooms. The variables are large and the possibilities are right. Fixing the style of the children's room too early may end up scratching the surface to fit the needs. Of course, the situation is different every year. Today I just want to share my experience and hope it can provide some inspiration to everyone.

This is what my children's room looked like before. You can see that it is basically covered with a carpet as a children's entertainment room.

After I went to kindergarten, I added a set of study tables and chairs;

Of course my wife and I slept with our children when they were young, but instead of choosing a conventional children's bed , we chose a wooden frame that "lays on the floor".

Since my home is in the northeast and has floor heating, I don’t have to worry about mold. If you live in the south, you can consider this " wooden pallet logistics rack"

This sleeping area has been with my daughter for four years since she moved in, from 2 to 6 years old.

is generally very satisfactory. The reasons are as follows:

① is large enough. The bed area of ​​2.0×1.2 meters is enough for a two-year-old baby to roll around in the bed;

② is beautiful enough. The wooden trusses are covered with tulle to create a daughter-like feeling. Fang Xiaotiandi fulfills her princess dream;

③ is flexible enough. Even after two or three years, her daughter moves to the room that has been reserved for her, and the entire bed can be moved away. There is no problem in using it for more than five years, and it can be used even until she graduates from elementary school (which will be shared below);

④ is separated without separation, and the baby and adults have separate sleeping spaces. , and easy to take care of;

This year my daughter has entered elementary school, and it’s time to try sleeping in separate rooms. Please remember what the children’s room looked like before↓

First remove the wooden roof truss of the master bedroom to facilitate transportation

Then temporarily put away the carpets and furniture in the children's room and move them aside, and then reassemble the wooden frame;

The next step is to lay out the bedding and soft furnishings;

Finally, take a look at the finished product Effect ↓

uses the combination cabinet as a soft partition to divide the children's room into a sleeping area and a study area;

The study area is centered on the children's desk, and the previous carpet can just cover the area,

The sleeping area is decorated with soft furnishings according to the daughter's preferences.

The study area can be seen directly from the bed;

The pink panther stands guard, and the walls are filled with pillows and dolls to effectively avoid getting dirty. From the wall,

you can see that the internal space is still very ample;

A sensor night light is installed under the bed to make it easier to get up at night;

In order to ensure the lighting in the sleeping area when reading, a floor lamp is placed at the end of the bed to supplement the lighting, which can be seen to be quite bright;

A recessed wardrobe is designed opposite the end of the bed. Due to the huge size of the wardrobe, it is easy to give people a sense of oppression when placed independently, and the height of the finished wardrobe is generally 2-2.2 meters, so the remaining space on the top of the cabinet is wasted and used as dust.

So to follow the principle of invisibility, just remember two points: embed + top.

① Embedding is to make a "concave"-shaped wall around the cabinet (the same is true for lightweight partition walls), and embed the cabinet into it to integrate with the wall to reduce the sense of oppression.

②Through the ceiling, the cabinet top is directly connected to the ceiling (the same is true for the suspended ceiling). Due to the height of the board, the height of a single cabinet is generally ≤2.2m, so consider lowering the ceiling height or stacking the upper and lower cabinets.

If you have children at home, as the children grow, the amount of sundries and clothes increases, and the height of the hanging and stacking areas changes, you need to adjust them in time to provide a more comfortable experience.Therefore, the IKEA Eggert series is used internally, which can be wall-mounted and can be changed by itself;

. The advantage of IKEA is that it is cheap enough and the materials are reliable. As shown in the picture, the total cost of these accessories is less than 2,000. It would be cheaper to just use shelves, but the stability and load-bearing capacity of pull basket are average.

• The minimum reserved dimension for wall width (cm) = shelf width × number of shelves + 6 + 2 × (number of hanging bars - 2). For example, I am using a 60cm shelf with a total of 4 hanging bars, so the minimum reserved size = 60×3+6+2×(4-2)=190cm.
• html The minimum spacing height of shelves with a depth of 318cm is 7cm, and the minimum spacing height of shelves with a depth of 38cm/58cm is 14cm.

The master bedroom has just enough space to move the massage chair in the living room.

So far, the renovation has been very successful. My daughter moved in that night. It has been a week now and she has not come to me crying in fear in the middle of the night as she was worried about before. The sleep quality is very good. Now she doesn’t even come to my room to sleep if I want her to. If your family is also considering the design of a children's room, you may wish to refer to it.

Therefore, the IKEA Eggert series is used internally, which can be wall-mounted and can be changed by itself;

. The advantage of IKEA is that it is cheap enough and the materials are reliable. As shown in the picture, the total cost of these accessories is less than 2,000. It would be cheaper to just use shelves, but the stability and load-bearing capacity of pull basket are average.

• The minimum reserved dimension for wall width (cm) = shelf width × number of shelves + 6 + 2 × (number of hanging bars - 2). For example, I am using a 60cm shelf with a total of 4 hanging bars, so the minimum reserved size = 60×3+6+2×(4-2)=190cm.
• html The minimum spacing height of shelves with a depth of 318cm is 7cm, and the minimum spacing height of shelves with a depth of 38cm/58cm is 14cm.

The master bedroom has just enough space to move the massage chair in the living room.

So far, the renovation has been very successful. My daughter moved in that night. It has been a week now and she has not come to me crying in fear in the middle of the night as she was worried about before. The sleep quality is very good. Now she doesn’t even come to my room to sleep if I want her to. If your family is also considering the design of a children's room, you may wish to refer to it.