Many people are worried that the tiles will fall off, so many people originally wanted to put tiles on the wall. After they were worried that they would fall off, they switched to other wall decorations and missed the tiles decoration of Xin Xinaninian!
In fact, there is no need to worry. As long as you master the real process of putting tiles, the fall of the tiles may be very small!
Look at the tiles in the picture ↑↑↑
We brushed the back of the tiles with quality assurance tiles back glue, and is just pasted directly on it, the chance of the tiles falling is lower than a few percent!
To be more safe, We bricklayers really put in their efforts and racked our brains to come up with a more secure solution. Everything is in mind for the owner!
is more secure than not brushing the adhesive, but it is still not enough. You also need to slot the back of the tiles and hang copper wire!
Don’t underestimate this copper wire, This is our bricklayer thinking day and night, after careful research, and after countless experiments, we came up with this safest method!
First of all, this copper wire hanging on the back of the tiles needs to be grooved on the tiles. The depth of the groove must be enough to bury the copper wire. If it is too shallow, it cannot be hung without load bearing capacity. If it is too deep, it is easy to cut through the tiles. tiles without some technology and experience cannot do such a fine job!
After slotting and hanging copper wire, you must also use Daligut to firmly stick the copper wire to the tiles. If the thickness of the tiles is sufficient, you can open the A-shaped groove to tie the copper wire to the tiles, so there is no need to use Daligut!
The load-bearing capacity of a copper wire can withstand at least 100 kilograms. Hanging two copper wires on a piece of ceramic tile is equivalent to double insurance. In this way, after the tile is put on the wall, if you want to fall off, you have to ask if you are willing to do this copper wire?
Do you think this is over↓↓↓
In fact, our tilers are far more simple than what you think?
In order to enhance the firmness and not worry the owner, in addition to "copper wire", the materials for tiling are also the top priority for !
Cement is necessary ↓
Cement is necessary ↓
Ceramic tile glue is necessary ↓
also needs to be combined with mortar glue ↓
Three materials are mixed together. After our reasonable ratio, the mixed materials are very viscous. It is no problem to say that it is exaggerated to make up for leaks!
If you paste the previous "clay tiles", use this "three-in-one paste material" we blended, and you can just apply it a little bit and pat it on the wall, and you don't have to worry about it falling!
Nowadays, there are a few more steps to operate stone tiles. After brushing the glue-mounted copper wire, adjust the paste materials and start laying them↓
points to focus↓
tile copper wire is not only the focus when hanging on the tiles, but also when hanging on the wall after starting to paste.
First of all, drill holes in the wall, drill holes about 10cm upwards according to the height of the tiles and apply expansion rubber particles, and then apply steel nails.
When pasting tiles, first use to vibrate to stick the tiles firmly, then tie the copper wire hanging on the tiles to the steel nails on the wall, and leave the grown piece to one side for the previous tiles to press, or bend it into the pasted tiles so that the cement slurry sticks it.
This is the so-called "wet hanging" tile sticking process, and it is also the most secure process I think. It is safer than the traditional direct " wet hanging " and more realistic than " dry hanging "!
The reason why wet hanging copper wire is recommended instead of using hooks and other pendants wet hanging tiles is very simple. Let’s look at the picture below first↓
The pendant shown in the picture is made of an aluminum alloy material. In our local dialect, it is called "eight-character hanging". The pendant such as is also more practical and has strong reliability!
But the disadvantage is that it requires processing and grooves. The grooves are not that suitable by the tiler on site. It is not suitable for thinner tiles, and this kind of pendant will also increase the thickness of the laying.
Another thing is that when using this type of horoscope, you need to paste the tiles and then fix them with steel nails, because the pendants are shorter and may hit the tiles when nailing them, which is more troublesome and increases the construction difficulty!
Postscript↓
Therefore, in order to prevent falling off, in addition to using more sticky pasting materials, it is recommended to use copper wire for wet hanging, so that you can basically achieve "small and foolproof"! In addition, if the tiles are not thick enough, it is not recommended to use eight-character hooks, and it is not recommended to use stainless steel sheet-style pendants. Honestly using copper wire wet hanging is definitely the safest way to stick tiles!
If you don’t believe me, ask the bricklayer masters who have worked for more than 20 years, let’s see what they say?
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-