In the first two articles, we summarized the advantages and disadvantages of the common seven types of heaters on the market ( "Purchase guide for warm winter artifacts: Summary of the advantages and disadvantages of seven types of heaters" ), gave six purchase standards for heaters, and sorted six types of heaters according to different performances ( "Purchase guide for warm winter artifacts: Six precautions and six major product performance sorting" ).
This article will give some product recommendations for different categories of heaters.
KONKA (KONKA) Small Sun Heater
This small Sun uses quartz tube to heat, which is ready to open and heat, and is also equipped with a lattice reflector to expand the heating area. The pitch angle of the heat source can be adjusted, so that users can effectively keep warm while sitting and lying down.
Previous small sun products often have dazzling light. This product has improved this and uses dark light to heat up to protect the user's eyesight as much as possible. There are two power levels, 500W and 1000W respectively, to meet the needs of different periods.
Safety, the product shell is made of flame retardant material and is set to tilt off power. When the angle between the machine and the ground is greater than 30 degrees, the power will be automatically cut off.
TCL-TN20-S08E Small Sun Heater
This small Sun uses carbon fiber tubes to generate heating, and the heating efficiency is slightly higher than that of quartz tubes. It also has a lattice reflector, flexible pitch angle and dark-light heating design.
Based on the reflective cover, this product also supports shaking the head to send warmth (65 degrees), further expanding the heating surface. The height is not fixed and can be lifted and lowered by 11cm freely. The power is also divided into two gears, 400W and 800W respectively, and supports remote control gear shifting, and can be timed up to 12 hours.
is a flame-retardant shell with an anti-scalding mesh cover in terms of safety; the control panel is equipped with children's lock ; when the inclination angle with the ground is greater than 30 degrees, the power will be automatically cut off, so the elderly and children can use it with confidence.
Midea "super single product" fan
This fan uses PTC ceramic electric heating element to generate heating, built-in dual DC fan , plus a 70-degree wide-angle shaking head to promote indoor air cooling and heat exchange and quickly send hot air to the whole house.
When working, the light is weak and the noise is low, which will not affect rest. The working gear is divided into two gears, high and low, and is adjusted through the knob, with a rated power of 2000W.
has a flame retardant and high-temperature resistant shell and dump power-off protection in terms of safety. In addition, the air inlet filter can be detached to avoid dust accumulation and produce odor during use.
In addition, since the product itself is lighter and can be moved at will, it can be used to dehumidify and accelerate drying of clothes.
3, electric oil styrene heater
Gree electric oil styrene heater
This heater relies on the internal thermal conductivity oil to generate heat when it is powered on, and there is no light noise floor throughout the whole process. There are 13 pieces of Youting Heating Pieces, which support the effective heating of the maximum 21㎡ space.
rated maximum working power is 2100W. Multiple gears are set on the side of the product. Adjusted by the knob, the power will be automatically cut off after the temperature reaches the set value and the constant temperature will be maintained for a long time. A clothes drying rack is installed on the front of the product, which can quickly dry clothes. There is an independent humidification box on the top to prevent dryness in the house through moisture evaporation.
. Dumping power outage and overheating power outage are set in terms of safety. The internal thermal oil expansion rate is low and there are no safety hazards.
4, electric heating film heater
Gree electric heating film heater
products use electric heating film to make heating, which can be regarded as an upgraded version of the electric oil stenol. There are 4 heating plates inside. After the power is turned on, the room is heated quickly within 6 seconds, and the air heat circulation is used to increase the heat of the room.
rated maximum power is 2100W, with a total of three levels, and is adjusted by the knob on the side of the product. Built-in humidification box, which uses electric heat evaporation to maintain the balance of air moisture in the house.
A clothes drying rack is also designed in front of the product, and in terms of safety, dumping and overheating power outage are provided.
is different from the electric oil stencil, and the electric heating film cannot maintain a constant temperature after power is cut off.
5, European fast heat furnace
Emmet graphene European fast heat furnace
The appearance of the product uses elegant blues, which is very beautiful. Superconducting hexagonal graphene is used for heating, which not only heats up quickly, but also effectively inhibits bacteria. The thermal conduction groove uses a 75-degree concave design, which can effectively accelerate the convection of air hot and cold. The work process is light, silent, and oxygen-free, and is a typical indoor-friendly type.
product maximum power is 2000W, and the third level of high, medium and low level (800W/1200W/2000W) is set, which can effectively heat the 25㎡ space. In addition, an intelligent anti-freeze mode of 0℃ is added, which will automatically heat when the room temperature is lower than 0℃ and stop heating when it is higher than 5℃.
The front end of the product is equipped with a clothes drying rack for drying clothes, and in terms of safety, a flame retardant body, a dump power outage, an anti-scalding barrier, overheating protection and an insulated socket are installed.
The entire fast heat furnace is only 6cm thick, and the waterproof level is as high as IPX4. It not only does not occupy space, but can also be used in the bathroom with confidence.
6, skirting board heater
Midea "super single product" graphene skirting board heater
This skirting board heater also uses graphene with excellent heating effect, mainly focusing on 3s fast heat, and heating the bottom air to make it rise to achieve heat circulation in the house. The work process is light and noise-free.
product maximum power is 2200W, and it has two high and low temperature levels (2200W/1100W). It can be switched through the control panel or remotely operated through the mobile app. Before people arrive, the room is warm. The biggest feature of this heater is that it incorporates the concept of smart home. Users can set the sleep curve according to their sleep conditions. During this period, the heater will adjust the heating gear and indoor temperature according to different sleep states. The built-in NTC sensor will maintain constant indoor temperature at any time in the warm air state, and freely switch between high and low gears to reduce energy consumption. The waterproof and dustproof level of
product is IP24, and the heating body has been insulated, so you can use it in the bathroom with confidence.
has a high-temperature power outage, dump power outage, and fire-proof and flame-retardant shell in terms of safety.
or above are the six common heaters products recommended. I hope it will be helpful when you purchase it.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-