Many people install a layer of screen windows on their home windows, which can prevent the entry of mosquitoes and dust, and also play a safe role.
Usually, the windows will be opened for ventilation for a long time. Over time, some dust outside will accumulate on the screen windows at home.
Especially in summer, windows are often needed to be opened for ventilation. Over time, some dust is easily accumulated on the screen windows. Moreover, the dust on the screen windows is difficult to clean. If you brush with a brush, it will deform the screen windows.
Many people don’t know how to clean the dirty things and dust on the screen. Some friends will remove them and put them in a place that is easier to clean. Some friends will wipe them directly with a towel, but no matter which method has its drawbacks.
If we remove the screen window and clean it, it will be very difficult to install it, but if we don’t remove it and clean it directly with a rag, it may also be unclear.
In fact, in addition to these two methods, we can also use the third method, just use an old mask to clean the screen. Friends who want to know how to do it can follow our article to read it.
If you want to clean the screen, you must first adjust a cleaning solution, otherwise it will be more troublesome when you continue cleaning.
We can find a container and squeeze a piece of toothpaste into the container. After squeezing the toothpaste, you can pour some baking soda into it.
After adding baking soda, we need to add two drops of dishwashing liquid to it. After all, we can stir them evenly.
Without adding water, they will be more viscous when they are stirred together and may become pasty. At this time, we also need to pour a small amount of white vinegar into it.
After pouring white vinegar, the white vinegar will react with baking soda, which may produce more small bubbles. At this time, we can choose to continue stirring. After fully mixing the white vinegar and other items, we can use it to clean the screen.
After preparing the solution, we also need to find a mask. We must first cut both sides of it. If not cut, we must also take out the steel wire inside, otherwise the screen may be damaged when cleaning. After the solution and mask are ready, we can find a softer toothbrush and use the toothbrush to brush the prepared solution on the screen window. After these solutions are adsorbed on the screen window, all the stains on it can be quickly softened.
Because toothpaste can clean, and white vinegar can soften some rust on it and other stubborn stains. In addition, dishwashing liquid and baking soda have strong stain removal capabilities, so we only need to apply this solution to the screen to soften the dirt on it.
After applying it, we don’t have to rush to clean it. Wait for about five minutes. After it is left to stand, we will clean it with a mask directly.
Everyone uses a mask to wipe the screen windows, so that the dust on the screens can be wiped off, and there is no need to worry about damage to the screens, because the mask is soft and will not cause the screens to deform when wiping. After wiping
, some cleaning solution will remain on the screen window. At this time, we can find a watering can and put clean water in the watering can.
We directly spray clean water on the screen with a watering can. Those stubborn stains and residual solution can be cleaned. In the end, we just need to wipe the remaining moisture with a towel.
Isn’t this method of cleaning screens particularly good? If your screens are very dirty, you might as well use this method to clean them.
Today's content ends here. Friends who have read it can forward the article so that more people can see it. See you next time.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-