1. Prepare related tools, such as wrench and screwdriver.
2. Take out angle grinder , first install the blank, and then tighten the screw with a screwdriver.
3. When cutting sheet , first place it on the angle grinder and then fix it with screws. However, when operating, pay attention to distinguish the front and back of the angle grinder.
4. After tightening the screws, install the handle on the side. How to remove the cutting sheet of
angle grinder?
For this type of product, after using it for a period of time, it is easy to not meet the cutting requirements, and it needs to be replaced at this time. During operation, you usually only need to hold the lock on the back of the device, remove the pressing plate, remove the cutting piece with a tool, and then reinstall a new cutting piece according to the relevant methods. However, sometimes this method does not work, and compulsory measures must be taken at this time. The methods are as follows:
1. You can use pipe clamps to lock the front and back of the device. Generally, the transmission gear is locked at the back, and the clamp is fixed in the front, and the cutting piece is unscrewed with force. These methods will consume more physical strength and should also be careful when operating.
2. Crush the cutting piece and then pour out the broken residue. This method usually requires the accessories to be broken to more than 50% before they can be taken out. It is relatively troublesome. If the operation is not properly done, it will easily damage the angle grinder. Therefore, if it is not necessary, it is not recommended to use this method.
3. If there is really no way, you can also consider burning with fire and using thermal expansion and contraction, so that the heated cutting sheet can be removed very easily.
Notes on using angle grinder
1. Before using angle grinder, it is necessary to check whether the angle grinder is damaged and whether all components are fully installed. If there is a problem and cannot be used, it needs to be repaired before use to avoid safety problems. In addition, the angle grinder cannot aging.
2. When cutting or grinding, the angle grinder must ensure that there are other personnel in the surrounding stations except the operators, and the cutting direction must not be in the direction of people, so as to avoid accidents, causing unnecessary casualties, and thus causing losses in all aspects.
3. When the angle grinder's grinding wheel is used and needs to be replaced, the power supply of the angle grinder needs to be cut off, and then the grinder is removed with props and replaced with a new one can effectively avoid accidents. If you are working on explosive items, it is best to prepare 2 to 3 fire extinguishers to ensure safety.
4. After using the angle grinder for half an hour each time, it needs to stop and rest for a while. The rest time must not be less than 20 minutes. This ensures that the angle grinder cools down, which not only ensures safety issues, but also provides the performance of the angle grinder.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-