Gas stoves are commonly used in the kitchen of your home. They mainly burn natural gas, gas, etc., and are used to boil water and cook. There is inevitably water in the kitchen, so can it still be used if the gas stove is accidentally injected into water? Is it dangerous? What sh

gas stove is a commonly used electrical appliance in the kitchen of your home. It mainly burns natural gas , gas, etc., and is used to boil water and cook. There is inevitably water in the kitchen, so can it still be used if the gas stove is accidentally injected into water? Is it dangerous? What should I do if I can’t burn it?

Can it still be used if the gas stove is injected?

Water inflow from the gas stove is still usable. If a small amount of water is injected, it will be evaporated or air-dried during the heating process, but it will easily rust over time. But if the water inlet is large, you should pay attention. If the gas stove is opened, it will easily damage the coal gallbladder, and causes a fire. is recommended to turn off; if the gas stove is not turned on, do not turn it on. It is best to dry it before using it, such as drying a rag or blowing a hair dryer.

What to do if the gas stove is injected and cannot be burned

After the gas stove is injected, wipe the gas stove and all parts of the gas switch, stove eyelet, battery, etc. clean and there is no water. Then try to ignite with a lighter.

If you turn on the gas stove, you can hear a slight bursting sound. This is the sound of gas, indicating that gas is flowing out. If the fire is not lit, you can try using a lighter to ignite it. Remember to turn off the gas to prevent accidents.

In addition, check the battery, first replace the battery and adjust the damper . Usually, the middle position feels good. Then poke the holes with wire to see if they are blocked.

If you have alcohol at home, you can also light the chopsticks with a small amount of alcohol, then turn on the gas stove and put the flame into the small mouth of the electric pole. If the gas stove catches fire, let it burn for a while and then close the valve. Repeat a few times.

What is the reason why the gas stove cannot be fired

1. There is insufficient gas in the gas and cannot be opened, so it may not be possible to open the gas stove.

2. It may be because the battery of the gas stove is out of power and the gas cannot be turned on. It may be because the gas cannot be turned on and the gas cannot be turned on;

3. It may be because the discharge needle has failed and the gas cannot be stained. It may also be because the gas stove pipe is blocked.