smart home is to reduce the burden on users, but many smart home products on the market run counter to it. Not only can it not reduce the burden on the user, but it increases the user's workload, which makes the smart home unnecessary. Take sweeping and mopping robots as an example. Many sweeping and mopping robots on the market are easily trapped by steps during the cleaning process, and cannot turn when encountering obstacles. After cleaning, users still need to clean up the mess.
not only did not bring convenience to users, reduce the burden, but increased the workload of users. Under the premise that the cleaning is not clean and the sweeper is trapped, the user has to "rescue" the sweeping and mopping robot and has to perform a second cleaning. Isn't this asking for trouble? Many young people don't have time to clean. After a day's work, they drag their tired body home and don't want to clean the room. The sweeping and mopping robot has become a must-have for the home. However, the chaos in the sweeping and dragging robot market has also made consumers worry about it.
But fortunately, not all sweeping robots are like this. As long as you know the choice, you can still get a satisfactory sweeping robot. Today I want to recommend the self-cleaning sweeping and mopping robot G10 just launched by Rock. This sweeping and mopping robot can meet all your "irrational" requirements and truly "free your hands"! Let's take a look at the Roborock G10 sweeping and dragging robot.
When cleaning in traditional households, it is necessary to constantly wash the mop, and the mop is stained with a lot of sand, hair and stains, which is difficult to clean. The process is time-consuming, labor-intensive and water-consuming, and Stone G10 completely solves this problem.
Stone G10 has a self-cleaning function,And its automatic backwash can be customized. Not only can you set the backwash time according to the plan of your own room, you can also set it according to a fixed time. For example, Stone G10 can be set to automatically backwash after cleaning a room, or it can be set to automatically backwash every 10 minutes. In actual use, it is obvious that the setting of the first method is more practical.
Stone G10 adopts a new method of cleaning mop, it has a slide rail device, when backwashing, the slide rail will repeat the movement from left to right, in this process Zhonghui cleans up the dirt on the mop by "scrubbing and scraping". The whole process will save more water, and the cleanliness rate is as high as 95%, which is cleaner than manual cleaning.
And its main brush is made of CUP rubber brush material, and there will be no hair entanglement, so it will be more convenient to clean the mop, most of the hair will be directly absorbed in the dust box. The stone G10 adopts a flat mop design, using silver ion antibacterial material, polyester and nylon material blessing, so that the mop has better water absorption and antibacterial properties, and it can last longer during the cleaning process.
When cleaning, the stone G10 uses high-frequency sound waves to mop the floor. When manually mopping the floor, you need to constantly apply downward pressure to mop it clean. The new cleaning method of G10 can produce 3000 vibrations per minute, and can continuously exert pressure on the ground, so even if there are stubborn stains on the ground, it can be thoroughly cleaned.
Regarding the "trapped" problem of sweeping and dragging robots, you don't have to worry about it on the Rock G10, even if it is a duplex apartment. Stone G10 has intelligent control lifting function,When it encounters a carpet or step that cannot touch water, it will automatically raise the mop. Especially in the process of backwashing, in order to avoid secondary pollution of the ground, it will also raise the dirty mop. After all the cleaning work is completed, when it returns to the cleaning charging base, the mop will also be lifted. This will not only be more ventilated, but also can be charged normally without the need for a waterproof pad.
Stone self-cleaning sweeper robot G10 also has an automatic water tank replenishment function, which is the only sweeper robot on the market that has this function. A floating ball Hall sensor is equipped in the water tank of G10. When it detects that the water in the water tank is insufficient, it will automatically replenish water. Therefore, there is no need for human involvement in the entire cleaning process. The key to this smart sweeping and dragging robot lies in the support of the RR mason8.0 path navigation algorithm. The first-class algorithm ensures the smooth operation of the Roborock G10.
is such a sweeping and mopping robot. Users "do not want to wash the mop", "do not want to replenish water", "do not want to clean the second time" and other unreasonable requirements, Stone G10 can help you achieve, who does not Heartbeat?
.-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-