Under normal circumstances, tiles are used on the walls and floors of bathrooms and kitchens, because tiles are more convenient to clean and suitable for watery places like kitchens and bathrooms. Wall and floor tiling always encounters a problem: which wall and floor tiles should be affixed first? That is, it is commonly known that the wall is pressed against the ground or the ground is pressed against the wall.
Not long ago, all the decorations in my house were done, but the bathroom was not tiled. When tiling the tiles, the master bricklayer asked me whether to paste the wall tiles or the floor tiles first. Because I didn’t understand this, I let the master bricklayer take care of it. As a result, the bricklayer master said, "Your bathroom has many corners, so let's make you a wall-to-floor design." I thought I would be pitted by the decorator if I didn’t know how to do it. I didn’t expect to live in 2 years without any problems. I hate it. Why didn't the salary increase for the master at that time? So the choice of wall pressure or floor pressure for bathroom decoration? Let me tell you now!
Wall pressure floor
First of all I want to introduce the design of bathroom wall pressure floor. Although the wall pressure floor and the floor pressure wall are first affixed with wall tiles, there are still certain differences between the two. Wall The floor wall tiles are pressed on the floor tiles, and the gap is horizontal.
There are also certain requirements for wall tiles, that is, wall tiles must be pasted from the second row from bottom to top, and the bottom of the wall tiles must be reserved, and the floor tiles should be pasted after the wall tiles are pasted.
General masters do not choose wall-pressing design, mainly because they think it is too troublesome, but wall-pressing ground does have the following advantages:
1. More beautiful
wall-pressing design Although there are gaps on the wall and ground, the gaps are horizontal and look more beautiful.
2. Good waterproof effect
The second major advantage of wall pressing is that it has good waterproof effect. The water on the wall will stay on the ground along the wall and will not affect the dry ash layer below. There will be leakage.
Ground pressure wall
Although the ground pressure wall is also pasted with wall tiles first, then floor tiles,But it is far less complex than the process of pressing the wall and the ground.
The wall tiles of the ground pressure wall can be laid directly from the bottom, and the floor tiles can be attached after the wall tiles are pasted.
Because the construction process of the ground pressure wall is simple, many decorators will choose the ground pressure wall decoration, but it does not mean that the ground pressure wall does not have any advantages. Let me check the advantages of the ground pressure wall:
1. Province钱
The construction process of the ground pressure wall is simpler. There is no need to reserve a place under the wall tiles, and the operation is easier for the master, because of this, the labor cost will be reduced.
2. It is not easy to empty the drum
We all know that insufficient contact between the tiles and the wall can easily lead to the hollowing phenomenon. The bottom row of tiles in the design of the ground pressure wall can perfectly fit the wall, so there is no hollowing phenomenon.
Which is better, ground pressure wall or wall pressure ground?
Ground pressure wall and wall pressure cannot be said to be good or bad. As for which decoration method you choose for your bathroom, it mainly depends on the structure of your bathroom.
If your bathroom is square and the gap between the wall and the floor is small, you can do the design of the ground pressure wall.
If your bathroom is not square, has many corners, and there are many gaps between the wall and the ground, it is recommended to choose a wall-to-ground design.
Well, I have elaborated on the bathroom decoration, which is better for wall pressure and floor pressure, and I will summarize it below:
For bathroom decoration, the wall pressure is better, and the corners of the wall are not easy to mold.
If the gap between your bathroom wall and the floor is not large, you can also choose the floor pressure wall design.
Want to know more exciting content, come and pay attention to Wah Jie Kan Home Decoration
(picture from the Internet,Invasion)
.-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-