In the morning, an owner asked me a question and said that his kitchen countertop had told the master not to install water barrier , but the master installed it. When the owner saw the water barrier, he put a circle of glue on it and wanted to take it off by himself. He asked if this would work?
I said this is not enough, it is not that the water barrier is difficult to handle. If you want to take it, you just need to use a wallpaper knife to cut the glass glue and you can take it off.
The reason why I can't take it is because I took the water barrier strip, and I couldn't bear to look at it directly inside, and the table was cut by the master to make it uneven.
I have encountered several situations. Once I chatted with a master who made a countertop. I asked him and he said that if there is no water barrier, it is not good to cut some corners on site. However, if you use water drill in the factory to cut it, you need to splice it when you arrive at the site. There may be more gaps, and the owner cannot accept it.
So many masters who follow the table would rather not have money than install a water barrier because it can cover up the ugly.
Since then, an owner told me that his family wanted to make a countertop without water barriers. I asked the owner if there are too many places to cut in your kitchen countertop?
Conventional kitchen flue or sewer pipe is on the corner. This situation is easier to deal with, but I am afraid that the flue or sewer pipe is in the middle of the countertop. Once this is the case in your kitchen, it is not recommended to make a countertop without water barriers.
This type of countertop is very difficult to process on site. Once there is a problem during the processing process, it will not be straight or cut too much. After installation, it will be more annoying to see.
Many owners pursue minimalist decoration and feel that the water barrier is simpler than the water barrier. In fact, it is not the case. For example, if you deal with the wall, there is a ceiling or gypsum line, the wall is easy to deal with. If there is no ceiling or gypsum line, the wall must be flattened. In this case, it is quite difficult to deal with the wall.
In short, the decoration style is simple, which does not necessarily mean that the construction is simple. If you want to do it, understand it first before making a decision.
