Close the mouth of the male corner and use the arc corner to add a bit of gentleness and roundness to the home. It is very effective, but it will not increase the home improvement budget, and it is even much cheaper than making bags.
So since this approach is very popular, it has also caused some problems.
In this issue, let’s take a look and explain the “arc closing” thoroughly, and give them the problems and solutions related to arc closing.
. How to make an arc-shaped corner? arc angles have two methods, each with its own characteristics. The following is detailed:
Method 1: smash the wall and batch arcs
In the demolition stage, the master can split the angles that are to be made into arc angles a little;
In the oil worker stage, the worker uses putty powder to batch the angles into arcs bit by bit;
Finally, through conventional means such as polishing and painting.
The disadvantage of this practice is:
① Test the worker's skills:
② The application range is narrow, not all corners have the conditions to smash and re-batch putty.
The rest are all advantages:
① As long as there is a reliable oil worker, the angle of the arc can be larger and it will be effective.
② does not have the splicing of the two materials, and it is less likely to crack. Compared with the arc-shaped corner strips in Method 2, it is more stable.
Method 2: Use arc angle bars
without smashing the wall. In the oil work stage, use putty to directly put the arc angle bars at the corners;
and then there are steps such as hanging the net, polishing, and painting.
Advantages of this practice:
① does not test the oil craftsmanship;
② has a wide range of applications, and even arc-shaped corners can be made on the beams. The disadvantages of
are: compared with the wall-killing putty:
① The effect is slightly inferior;
② is prone to cracking.
Both are cost-effective, theoretically, to smash the wall and make putty, which is a little more expensive, and basically all are labor expenses.
buy Yangjiao strip . Although it also costs money, that thing is very cheap, a few dollars per piece. Nowadays, it is an era when labor costs are more expensive than materials.
Generally speaking, the two are very cheaper to pack the doors. The whole house can be made into arc sun corner strips, which is only a few hundred dollars. Even a door cover cannot be packed. You should know that window covers and door covers are all made of solid wood door covers, which are often thousands or tens of thousands.
Based on the characteristics of both, we concluded that the method 1 is more suitable for use on the balcony entrance, this conspicuous place.
. Method 2 is more suitable for those relatively minor positions. Which locations are included is the next question.
. Where can the arc male angle be used? In addition to being used on the balcony, the arc sun corner can be used in three types of places!
Note that these three types of places are only available for arc-angle closing strips.
is:
on the beam of the room, which can weaken the sharp angle and thus weaken the discordant beam;
aisle, which is not only better looking, but also reduces the probability of collision to a certain extent;
windows can replace the window cover, because the window cover itself only has a decorative function, and uses arc angles. For most families who choose modern style, simple style, and minimalist style, the decorativeness is better than the window cover.
. There are also requirements for the selection of circular corners in places such as
. Let’s continue to see how to choose circular corners?
. How to choose an arc-angle bar? arc male angle bars, divided by size, can be divided into small arcs and large arcs.
Small arcs are suitable for use in: window covers, room beams and other positive corners, which will be better handled and have a relatively coordinated effect.
large arc is suitable for use in: balcony passes, door openings, etc., with better results.
arc male corner strips, and there is another way to distinguish them according to whether they are bent:
unbendable arc male corner strips, of course, they are used in right-angle door openings and window covers.
and the bent arc corner strip are used at arched door openings and passes.
Since we have talked about it, we will also explain the whole set of arched door openings to everyone!
. How to do the arc-angle angle of the arched door opening? To make an arched door opening, one premise must be determined, that is, the arched door opening in the home must be higher than all other door openings in the home, otherwise it will be ugly. At the operation level of
, let the woodworker use gypsum board to create an arc-shaped semicircle.
Remember that the diameter of the semicircle should be equal to the width of the door opening, otherwise it should be inconsistent, and the effect will be very poor.
specific relationship diagram is as above.
Then it is the putty. When making the putty, the bendable large circular arc-shaped male corner strips are also added, and the arched door hole is made.
This is a comparison picture between the front and back of the arched door, and the effect is still good.
balcony is the same as the corridor door opening, and it is even simpler. Generally, the width of the balcony is about 3 meters.
So, for this arc angle, you can buy ready-made gypsum angle (also called gypsum beam drag) online.
Or, for a more accurate and coordinated arch, you can also use gypsum board or even cut out beautiful arc angles.
Then use bendable arc corner strips to pack the corners. After polishing and painting, you can create a gentle and beautiful arched balcony pass.
can pass and door hole, and later, you will encounter a new challenge - skirting line .
skirting line, it won’t turn. What should I do?
. How to do a skirting line with arc angles? The skirting line with the arc-angled angle is roughly divided into four types:
The first type: right-angle hard-split
means doing nothing, just follow the regular 45° angle and force it.
This solution is the most convenient. If the oil worker repairs it later, it will not be very ugly, but it is not that perfect.
small arc, you can make do with it, the large arc looks a bit more protruding.
The second type: double-cut pairing
This can be used for large arc skirting lines. In fact, it is to stuff an equilateral triangle between the two skirting lines.
is the most recommended solution. It is very economical and beautiful. The only regret is that it cannot be made if it is a wall-breaking arc.
The third type: stainless steel skirting line
This type can be used for both the big and small arcs and the arcs that are broken into walls.
Usually, it will be slightly more expensive than solid wood skirting (and there are more expensive solid wood skirtings), but the effect is almost perfect.
It should be noted that if there are arc corners, do not use this ultra-thin curved skirting line, cut at the corners, and the bottom will also break.
The fourth type: customized solid wood skirting line
For solid wood skirting line, you have obsession with solid wood skirting line and have a sufficient budget. You can choose this type, or you can achieve a near-perfect effect.
However, the cost is indeed not small. The arc part costs several hundred yuan per meter. If you make a few more arc angles in the whole house, the cost will be amazing.
So it is not recommended that ordinary people try to mess with this. We not only need the effect, but also save money.
Of course, I also hope it can be more durable. Even if you use circular arc male corner strips, it is not so easy to crack. Let’s talk about ways to avoid cracking.
. How to prevent arc angle cracking? two words: hang the Internet.
All processes such as polishing arc-shaped corners are unreliable.
How to operate it (this step can be shown to the oil worker at home):
First use gypsum to fix the arc male corner strips.
Wait until the arc-angle corner strip is almost done, and then hang the net on the arc-angle corner strip.
Then batch putty, polish and spray paint.
If the master refuses to do it, it is too lazy to do it, and there is no other reason. I can usually make Bao Huazi for the master and grind it.
But I still have a correct attitude. There is no need to crack latex paint. If there are problems in the later stage, we will just repair it. It is not that difficult. Let’s continue to look at the repair plan below.
. What if it bumps or cracks? is like other walls painted with latex. It is divided into two steps in the face of bumps and cracks:
Step 1: Replenish putty.
If you have putty at home, use putty. If you don’t have putty, you can buy a wall repair cream.
fell to the wall and filled the hole first.
Then, after polishing, most of the white walls, you can’t see them after polishing them, and there is no need to perform the second step.
But if it is a wall with color, or if the wall is dirty, has scribble, or has slight scratches, you can take a look at the second step.
Step 2: Brush the paint
Of course, it is best to leave a little of it during decoration. The paint used at that time is convenient for later repair.
If there is no paint left at that time and the area is not large, you can buy a small roller brush of this latex paint.
not only has white, but also many common colors such as gray, beige, etc.
Use a small roller brush for repairing the wall to paint the areas where the wall paste is repaired, as well as dirty, painted, and slightly scratched walls, so that the wall can be completely restored to its original state.
Of course, when it comes to repairing the wall, there are color differences. Even if the latex paint at that time is left, there will be color differences due to the different oxidation degree, but it is not obvious. Basically, if you don’t look carefully, it is difficult to see.
Since we have talked about it, we will also explain the whole set of arched door openings to everyone!
. How to do the arc-angle angle of the arched door opening? To make an arched door opening, one premise must be determined, that is, the arched door opening in the home must be higher than all other door openings in the home, otherwise it will be ugly. At the operation level of
, let the woodworker use gypsum board to create an arc-shaped semicircle.
Remember that the diameter of the semicircle should be equal to the width of the door opening, otherwise it should be inconsistent, and the effect will be very poor.
specific relationship diagram is as above.
Then it is the putty. When making the putty, the bendable large circular arc-shaped male corner strips are also added, and the arched door hole is made.
This is a comparison picture between the front and back of the arched door, and the effect is still good.
balcony is the same as the corridor door opening, and it is even simpler. Generally, the width of the balcony is about 3 meters.
So, for this arc angle, you can buy ready-made gypsum angle (also called gypsum beam drag) online.
Or, for a more accurate and coordinated arch, you can also use gypsum board or even cut out beautiful arc angles.
Then use bendable arc corner strips to pack the corners. After polishing and painting, you can create a gentle and beautiful arched balcony pass.
can pass and door hole, and later, you will encounter a new challenge - skirting line .
skirting line, it won’t turn. What should I do?
. How to do a skirting line with arc angles? The skirting line with the arc-angled angle is roughly divided into four types:
The first type: right-angle hard-split
means doing nothing, just follow the regular 45° angle and force it.
This solution is the most convenient. If the oil worker repairs it later, it will not be very ugly, but it is not that perfect.
small arc, you can make do with it, the large arc looks a bit more protruding.
The second type: double-cut pairing
This can be used for large arc skirting lines. In fact, it is to stuff an equilateral triangle between the two skirting lines.
is the most recommended solution. It is very economical and beautiful. The only regret is that it cannot be made if it is a wall-breaking arc.
The third type: stainless steel skirting line
This type can be used for both the big and small arcs and the arcs that are broken into walls.
Usually, it will be slightly more expensive than solid wood skirting (and there are more expensive solid wood skirtings), but the effect is almost perfect.
It should be noted that if there are arc corners, do not use this ultra-thin curved skirting line, cut at the corners, and the bottom will also break.
The fourth type: customized solid wood skirting line
For solid wood skirting line, you have obsession with solid wood skirting line and have a sufficient budget. You can choose this type, or you can achieve a near-perfect effect.
However, the cost is indeed not small. The arc part costs several hundred yuan per meter. If you make a few more arc angles in the whole house, the cost will be amazing.
So it is not recommended that ordinary people try to mess with this. We not only need the effect, but also save money.
Of course, I also hope it can be more durable. Even if you use circular arc male corner strips, it is not so easy to crack. Let’s talk about ways to avoid cracking.
. How to prevent arc angle cracking? two words: hang the Internet.
All processes such as polishing arc-shaped corners are unreliable.
How to operate it (this step can be shown to the oil worker at home):
First use gypsum to fix the arc male corner strips.
Wait until the arc-angle corner strip is almost done, and then hang the net on the arc-angle corner strip.
Then batch putty, polish and spray paint.
If the master refuses to do it, it is too lazy to do it, and there is no other reason. I can usually make Bao Huazi for the master and grind it.
But I still have a correct attitude. There is no need to crack latex paint. If there are problems in the later stage, we will just repair it. It is not that difficult. Let’s continue to look at the repair plan below.
. What if it bumps or cracks? is like other walls painted with latex. It is divided into two steps in the face of bumps and cracks:
Step 1: Replenish putty.
If you have putty at home, use putty. If you don’t have putty, you can buy a wall repair cream.
fell to the wall and filled the hole first.
Then, after polishing, most of the white walls, you can’t see them after polishing them, and there is no need to perform the second step.
But if it is a wall with color, or if the wall is dirty, has scribble, or has slight scratches, you can take a look at the second step.
Step 2: Brush the paint
Of course, it is best to leave a little of it during decoration. The paint used at that time is convenient for later repair.
If there is no paint left at that time and the area is not large, you can buy a small roller brush of this latex paint.
not only has white, but also many common colors such as gray, beige, etc.
Use a small roller brush for repairing the wall to paint the areas where the wall paste is repaired, as well as dirty, painted, and slightly scratched walls, so that the wall can be completely restored to its original state.
Of course, when it comes to repairing the wall, there are color differences. Even if the latex paint at that time is left, there will be color differences due to the different oxidation degree, but it is not obvious. Basically, if you don’t look carefully, it is difficult to see.
