1. How to clean Martian integrated stove ?
1. The hood module
integrated furnace hood module cleaning object is oil stains. Relatively speaking, due to the high after-sales fume rate of Mars integrated furnace, the surface of the fuselage will not be covered with a lot of greasy, and cleaning is relatively simple. The greasy mainly adheres to the oil network. The inner wall of the flue and the turbine need to be cleaned.
Oil Network: After several generations of innovation, the oil network materials have been greatly improved, especially the Martian comprehensive furnace uses Teflon materials and nanopolymer materials, which have high stability and cannot absorb oil smoke. The cleaning of this oil net can be easily done, and only half a minute after meals can be wiped with a wet rag. If the comprehensive stove brand you purchased is not as good as Martian in oil net materials, you can try scrubbing with a warm cloth dipped in neutral detergent .
Note: Do not scrub with steel wiping balls to avoid damaging the oil-free coating on the surface of the oil mesh and affecting the use effect.
flue inner wall and turbine: This is a necessary channel for oil fume emissions. After long-term use, oil smoke will inevitably accumulate. Big brands will also undergo an oil-free coating treatment on the inner wall, which will greatly facilitate daily cleaning and maintenance. Press the lock buttons on both sides of the flue to separate the oil net from the flue, and the inner wall of the flue is clearly visible.
Usually, when you clean yourself, you can spray neutral detergent directly into the smoking port. The smoker runs at low speed for 2 minutes, allowing it to suck into the flue, and the inhaled detergent will break down and flow into the fuel tank.
head surface: In addition to the above two key points, you only need to use a damp cloth to scrub the dust in front and behind the head.
2. Stove module
This module is mainly used for daily cooking spills and traces left by dirt near burner .
Stove countertop: Clean and maintain countertops with soft gauze and soapy water (or special cleaner). There are two options for Mars Comprehensive Furnace: stainless steel countertop and tempered glass countertop, making it more convenient to clean.
Ignition Parts: Sometimes food residues or soups can clog the fire holes, causing ignition failure, so the cover part should be kept clean and dry. If the ignition is not smooth, remove the furnace rack and cover (care to operate after cooling, be careful of burns), soak in neutral detergent for a period of time, and use a toothpick to remove impurities and carbon from the holes.
2. Maintenance method of Martian integrated stove
1. Clean the surface of the integrated stove: clean and maintain the countertop with soft gauze and soapy water (or special detergent). Do not use granular detergent or steel wool to clean the countertop, as it will cause scratches on the stainless steel surface and affect the beauty of the stove.
2. Clean the fume channel: Use the appropriate degreasing agent for cleaning. First, start the low-speed gear of the range hood , then spray the oil degreasing agent to suck it into the oil fume channel, dirt decomposes and flows into the oil tank.
