Today, we continue to share with you the common faults of smart toilet . Yesterday, a customer asked and said that his smart toilet did not flush and often dripped water. He suspected that the toilet at home was broken, but at present The customer's community was under control and the maintenance technician could not come to the door, so I consulted in the background.
If the same problem occurs in your smart toilet, you need to check whether the angle valve is open and clean the filter, and then check whether the water inlet pipe is folded.
Today, we will share a tutorial on cleaning the smart toilet filter.
1. Close the water inlet valve of the toilet, and turn the handles of the water inlet valve and clockwise. This step is very important. If you do not close the water inlet valve, water will spurt out after removing the filter.
2. Disassemble the filter and disassemble it by rotating it counterclockwise.
3. To clean, you need to disassemble the filter and clean the stains on the filter. You can use an old toothbrush and then wipe it clean with a rag. We need to remind everyone to be careful not to use too much force when cleaning the filter to prevent it. The filter is deformed.
4. Reinstall the filter. The filter needs to be installed in its original position smoothly. Remember that the filter must be tightened. If it is not tightened, it will cause water leakage in the future.
5. Open the water inlet valve and check whether there is still a water leakage problem during use.
After the customer tried the above steps, the water leakage problem did not occur again. If your smart toilet also has such a fault, it is recommended to clean the filter and then check whether there is indeed a fault.
