Exterior wall insulation and decorative integrated board should not be drilled into the base wall with an electric hammer according to the design or construction layout direction. The drilling depth should not be greater than the effective anchoring depth of 10mm. According to the direction of the horizontal reference line, the bracket is first slightly aligned with the anchor bolts, and then adjusted to accommodate the horizontal line.
adopts a multi-layer structure design, with high strength and good thermal insulation and fire protection properties. The exterior wall thermal insulation and decorative integrated board is composed of extruded insulation board , reinforcing ribs, internal and external bonding reinforcement layers and thermal insulation transition layers, and has high mechanical strength. Fiber products are melted at high temperatures, and the fibers are fine and contain a lot of air. Because the air flow inside the fiber is very slow and the thermal conductivity is very low, it is a high-quality thermal insulation material .
After the promotion of energy-saving design standards in various regions, the energy-saving of building walls has made a qualitative leap. The technology represented by exterior wall insulation is developing rapidly, and the product form is also developing from single to diversified. This avoids the negative impact on product quality caused by factors such as differences in construction conditions and workers' production levels at the construction site.
The entire production cycle of the exterior wall insulation and decorative integrated panels meets the requirements of green environmental protection. The system has an energy-saving structure, waterproof and thermal insulation, and is highly efficient and energy-saving. The thermal insulation core layer is made of hard foam polyurethane and rock wool with excellent fire resistance, which has higher thermal insulation efficiency and greatly reduces the energy consumption of heating and cooling.
