Installing a small home elevator at home can save a lot of time and energy in going up and downstairs, so many people will install a home villa elevator in their villas or self-built houses. Traction elevators occupy an important position among home elevators due to their mature

Installing a small home elevator at home can save a lot of time and energy in going up and downstairs. Therefore, many people will install a home villa elevator in their villas or self-built houses. Traction elevators occupy an important position among home elevators due to their mature technology and high cost performance.

Traction elevators are similar to ordinary public elevators. They use steel bars or wire ropes to maintain the sliding friction generated on the traction machine . At the same time, the power of the product is relatively low, which is more environmentally friendly and energy-saving. The disadvantage is that it needs to occupy part of the shaft size. Many people are worried that they cannot install it in their own homes. So what are the specifications of a traction home elevator? How much space should be reserved when installing a home elevator?

The difference between a home elevator and a public elevator is that it is a personalized and customized product for individuals and families. Different designs are carried out according to the size and layout of the residents' homes. The rated load of traction home elevators is divided into three types: 260 KG, 320 KG, and 400 KG. 260 KG refers to the elevator car with a smaller size. If the usable area of ​​the elevator suite does not exceed the 1.6 square meters stipulated by the state, you can design a home elevator. If the pre-embedded area where the elevator is installed is 1100mm wide and 1100mm deep, then the elevator can ensure 700mm wide x 700mm deep. This standard belongs to small-sized elevators, and the size of the elevator shaft is too small, so it needs to be built with a steel frame structure to save space.

Under normal circumstances, the specification of the elevator should be 1200mmX1300mm, and the pre-embedded size is 1800mmX1600mm. Traction home elevators are usually divided into induction doors and hand-operated doors, so these two ways of opening the door should be considered in the design. Take a 700 mm wide door as an example. If the design of the automatic middle structure is followed, the net width of the elevator shaft is 1550 mm. For example, if the design of the automatic side-opening door is followed, the net width of the elevator shaft needs to be 1300 mm. Width, if according to the sliding door design, then the width of the elevator shaft must be 1100 mm.