Pipe manufacturers share how to do home decoration and plumbing construction? In home decoration, water and electricity installation is an essential project in every family, and it is also a more important link. However, for such a crucial link, don’t you want to install it well?

2024/04/2700:23:34 home 1093

pipe manufacturer shares how to do home decoration and water and electricity construction?

In home decoration, water and electricity installation is an essential project in every family, and it is also a more important link. However, for such a crucial link, do you really want to install it well? But the installation details are completely in the hands of the workers, so we have a hard time making a choice! However, the editor of our pipe manufacturer Jieerkang Building Materials saw such an on-site water and electricity project and came to share it with everyone!

This decoration company has very high requirements for the layout of water and electricity projects. Two supervisors explained that the requirements for water and electricity installation must be the same as those in the north: water should go to the top and electricity should go to the ground to avoid deformation or bulging caused by moisture on the floor of the house. . Next, let’s take a look at the scene!

Pipe manufacturers share how to do home decoration and plumbing construction? In home decoration, water and electricity installation is an essential project in every family, and it is also a more important link. However, for such a crucial link, don’t you want to install it well? - DayDayNews

1. Protection work

When you look at the decoration, the protective measures taken outside, the entire elevator and walls are well protected! The height of the wall protective film should be about 1.5m. No, the ground must also be protected!

2. Water and electricity slotting

Because the owner requires the water to go through the ceiling and the ground, so the slots we see are mainly for strong and weak electricity. No, the on-site supervisor said that every step in our water and electricity installation is essential. The main steps include springing wires, slotting, pipe routing, threading, sealing slots, and acceptance inspection.

The supervisor also said that when cutting the groove, the depth and width of the groove are particular, and the wire pipe must be buried! The width of the slot must be determined according to the number of rows of wire pipes.

Of course, when grooving, you must pay attention to the horizontal and vertical directions! The wire tube can be made horizontally and vertically.

Pipe manufacturers share how to do home decoration and plumbing construction? In home decoration, water and electricity installation is an essential project in every family, and it is also a more important link. However, for such a crucial link, don’t you want to install it well? - DayDayNews

3. Horizontal and vertical

The advantages of horizontal and vertical installation of water and electricity: first, it is to facilitate the construction and wiring of plumbers; second, during the later use of home appliances, if there is a problem with any line, it is also convenient for repair.

4. Water and electricity installation

When installing water and electricity, you must remember the water and electricity installation and circuit installation. You must pay attention to the distinction between weak electricity and strong electricity. Red PVC pipes are for strong electricity, and green PVC pipes are for weak electricity! When laying PVC pipes, be sure to pay attention to the strong and weak wiring. The corners should be 45 degrees. The advantage of this is that it is easier for the master to thread the wiring in the early stage, and it is easier to pull out the wiring for maintenance if there is a problem with the wiring later.

Also, there must be a certain distance between strong and weak electricity! The advantage of this is to facilitate the backfilling of cement mortar later, and to prevent mutual interference between the two!

5, socket

When installing sockets in the house, be sure to keep all sockets on the same plane! In terms of detail processing, the bottom box is connected to the middle of the electrical connection. The purpose is to prevent damage to the wire diameter during the early threading process, and to avoid sealing when filling cement in the later stage, which will facilitate repairs if there is a problem with the line in the later stage.

Pipe manufacturers share how to do home decoration and plumbing construction? In home decoration, water and electricity installation is an essential project in every family, and it is also a more important link. However, for such a crucial link, don’t you want to install it well? - DayDayNews

6. Waterway installation

From the current point of view, we can see that many people still walk on the waterway on the ground. However, we can see from this that they are all walking on the ceiling! The master said that although this is a bit troublesome, if there is a problem with the water pipe later, it will be discovered quickly. It is difficult to find on the ground. Even if it is discovered, it will probably start to affect the neighbors!

To sum up, there are pros and cons for water on top and electricity on the ground. Some plumbers say that the benefits outweigh the disadvantages, but other plumbers say that the disadvantages outweigh the benefits. Anyway, everyone has their own opinion. At this time, it is necessary We need to ask and think more before making a decision. After all, no one wants to rework the home after the water, electricity and home decoration is completed, right? If you have any other questions, you can consult us at any time.

home Category Latest News