air purifier standard system and corresponding test items:
1. Air purifier safety performance standards:
p6.1112005, similar household appliances Part 1: General requirements"GB4706.45-2008 "Special requirements for safe air purifiers for household and similar electrical appliances"
strong Purification performance of air purifiers Standard:
GB 36893-2018 "Air Purifier Energy Efficiency Limits and Energy Efficiency Rating" (implemented on December 1, 2019)
181span GB/2015 air purifier GB/2015
GB 21551.1-2008 "General Rules for Antibacterial, Sterilization and Purification Function of Household and Similar Electrical Appliances"
GB 21551.3-2010 "Antibacterial, Sterilization and Purification Function of Household and Similar Electrical Appliances" Special requirements for air purifiers"
3. Air purifier testing items:
air purifier quality inspection report (including air purifier electrical safety and purification performance testing) test items are as follows:
1. electrical safety (electrical safety regulations) 2. Clean air volume (particulate matter, formaldehyde, toluene, benzene, ammonia, TVOC, etc.)
3. Cumulative purification volume (particulate matter, formaldehyde, etc.) _p5span 4, power purification Energy efficiency) (measured power, standby power)
5. Purification energy efficiency
6. Noise (sound power level) 7 Staphylococcus aureus, Escherichia coli, natural air bacteria, Aspergillus niger, phage, influenza virus, enterovirus, etc.)
span 8 ozone, TVOC , PM10 , UV, ozone 24 hours increment)9. Removal rate (formaldehyde, toluene, benzene, TV2.5, OC, particulate matter O2, SO2 , etc.)
10. Negative ion concentration ( anion)
spanspanspan2 sulphur deodorization span1 3span2 sulphur deodorization performance Gas , hydrogen sulfide , acetaldehyde , acetic acid, etc.)
strong8 and strong_span strong8 and strong_span strong8 and strong8 and strong_span strong8 and strong8 and strong air purifiers
safety performance standards:
safety standards,GB4706.1-2005 "Safety of Household and Similar Electrical Appliances Part 1: General Requirements" stipulates the general provisions for the safety of household and similar electrical appliances. The GB4706.45-2008 "Safety of Household and Similar Electrical Appliances Special Requirements for Air Purifiers" sets requirements for the special aspects of this classified product of air purifiers.
Purification performance standards:
Interpretation of GB/T 18801-2015 "Air Purifier" 1p 801 released on January 18, 2015 1p 801 2015 The national standard "Air Purifier" is the third edition and the second revision of the standard.
1. Usage performance
The purification capacity reflects the actual working capacity of the purifier, which is called the clean air volume (CADR), which can be purified per unit of time. , The unit is cubic meter per hour, m⊃3;/h. Requirements:
2. Health index requirements
The health index requirements are derived from the particularity of product use, and fully consider the personal safety of consumers during use. Standard health requirements refer to the emission of harmful substances, as well as the sterilization and antibacterial capabilities of the product during the working process. The specific requirements are as follows:
3. Air purification energy efficiency
direct response to energy efficiency products Design and manufacturing level,The purification energy efficiency of the purifier is divided into two parts, namely the power consumption during operation and the power consumption in the standby state. The specific requirements are as follows:(1) The standby power consumption of the purifier should not exceed 2.0W.
(2) The purification efficiency of particulate matter should not be less than 2.00m⊃3;/W.h. See Table 5 for its classification index.
(3) The purification efficiency of gaseous pollutants should not be less than 0.5m⊃3;/W.h. See Table 6 for the classification index.
4. Inspection rules
The product inspection is divided into factory inspection and type test. The factory inspection is the routine inspection for each installation that must be checked. The items are inspected, and only after passing the inspection can they leave the factory.
type test is the final product design inspection, the overall inspection of the product design, all items in the standard, and GB4706.45 "Safety Air Purifiers for Household and Similar Electrical Appliances" All items in the "Special Requirements" safety standards should be inspected, and only after the inspections are qualified can be finalized and produced. In order to maintain the stability of product quality, a type test is carried out once a year. For products that have been stopped for a period of time and need to be resumed, production can only be continued after the type test has passed the inspection.
5. Logo requirements
The logo is the most important feature description of the product.At the same time, it is important information for consumers to purchase and use safely, as well as an effective means to regulate market competition. In addition to the requirements for universal signs, the standard also adds requirements for the characteristics and performance of the purifier.
.
