Less than six hundred PEBAX midsole, Zhige 1.5 after the upgrade of the Zhige generation actual combat evaluation

No other configuration and shoe types have been changed. This is why this pair of shoes is called Zhige 1.5. Many people say that Zhige II is undesirable. To be precise, the pair of shoes is an improved version of Zhi Ge 1.0.

Now let’s review the shortcomings we mentioned in the evaluation of Zhige 1.0 at the time: the shoe upper was too thin and the shoe laces were tightened. Foot feeling, the foot feeling of the entire midsole is hard, and it takes a lot of strength to step on the midsole. Poor foot feeling experience in non-exercise state.

This time, Zhige 1.5 has been upgraded for these two points.But there are also some new problems. Below we explain the actual combat evaluation.

evaluation of personnel data:

upper performance

first wrote about wearing shoes fit problems.

Because of the adjustment and thickening of the upper, the overall sense of wrapping is stronger than the previous one. Although it increases the circumference of the entire foot, Because of the replacement of the material, the shoes will be a little wrapped or fit too closely on the forefoot and instep.

So the size of the friend who wears Zhi Ge 1.0 before remains the same choice. For those who wear 42.5 or 43 on a daily basis, choosing 43 is more suitable. The standard foot 42.5 yards normally chooses a package that feels very good.

thin-footed friends are good news,Directly selecting the normal size of Zhi Ge 1.0 also has a good sense of wrapping. Friends with wide feet and high insteps are recommended to try it on, and the same is true for flat feet . But overall, in addition to thin feet, it is recommended to choose a half-size option, for the reasons we will talk about later.

If you choose the right size, you can't fault your feet and thin feet. Tightening the shoelaces when wearing statically will not feel the same as the previous one. However, there will still be a little bit of discomfort when the ankle is stretched in front of the ankle during dynamic exercise. Therefore, it is still recommended to choose thick elite socks, otherwise you will feel uncomfortable under high-strength conditions. This is why it is recommended to increase the size by half in addition to thin feet.

There is no non-healing phenomenon in the shoes. You can maintain good shoe-foot integration without passing through the last set of lace holes. The full-length thick inner boots and two padding on the heel fully enhance the package of this pair of shoes.

The strength of the upper can also be completely assured. The upper support of the previous one is very good, and the improved one is even more so, and because of the replacement of materials and increasing the circumference, Part of the phenomenon of lateral TPU jamming in the previous game has also been improved to a certain extent.

The upper performance of this pair of shoes can definitely get a very high score in the case of choosing the right size.However, it should be noted that the entire inner length of the shoe has not been shortened. It was tightened just above and on both sides of the foot circumference. So you must carefully read the size selection.

The point worth mentioning here is that if the size is right, in addition to the midsole that can provide arch support, the upper can also provide arch support, so you must choose the right one. size.

midsole performance

technology is replaced by the “span 8span” technology, which is the most deuterium-experienced hydrogen span 8span. On the heel, whether it is heavy or small, you can clearly feel the soft elastic feeling of the heel, the feedback is very fast, and the cushioning performance is excellent. As a "hydrogen" midsole foamed with PEBAX material, in fact, I would prefer to say that it uses TPA material. Compared with the 14% midsole, you can take a look at the feel of the two pairs of shoes and the sound of the midsole. It's almost the same.

The midsole of Zhige 1.5 uses the whole palm "hydrogen" technology. The hardness is about 41, and the hardness of Zhige 1.0 is about 46. From the hardness tester, it seems that the difference is not very big. The actual experience of Lizhi Ge 1.5 is a softer foot feel.

However, the forefoot part 1.5 is the same as 1.0.It still needs a certain amount of strength or weight to have a noticeable foot feel, and there will be a noticeable sense of rebound when starting up. However, there is not much difference in the foot feel with 1.0 in the case of static wear or on the road. It is just a touch of toughness, or the forefoot experience is more upgraded when playing. The hind sole is the part where the foot feel is significantly improved. The entire hind sole rebounds faster than 1.0, and the foot feel is more obvious.

Generally speaking, there is still a certain sense of space. When starting, the rebound feeling is more from the carbon plate of the forefoot. The reason given is relatively large and hard, and it takes a certain amount of strength to step on it.

So the entire forefoot process is actually bending-resistance-bending hard-faster feedback. Therefore, it is very suitable for friends who are heavy and pursue forefoot propulsion. For small weight defenders with insufficient strength, the foot feel is not obvious, but because the forefoot is still overall tough, there will be no delay in starting. .

Needless to say, the back palm cushioning needless to say, 95kg of Pang Peng is completely enough. The cushioning limit is very high.

In addition, the back of the insole of this pair of shoes looks like a nut insole, but the overall is a bit softer. You can watch the video and feel it yourself. So try not to take out the insole, it will be more difficult to put it back.

Here we focus on the place where the foot arch supports,For normal arches and high arches, both fit and support in place, and can feel the support of the arch during exercise, but for flat feet, there will be an excessive experience of topping the arch during exercise. In addition to the design of the sneaker last itself, another reason is the insole. It is recommended to change to an insole with hardness and a separate arch supporting arc, which can prevent excessive contact between the arch of the foot and the carbon plate during exercise.

As for the torsion resistance of sneakers, just watch the video directly. It shouldn’t be necessary for me to say anything?

outsole performance

is the same as the previous one. It has a hardness value of about 68. Crystal bottom. The overall sole pattern is a relatively thick and deep pattern, which is composed of a mixture of multi-directional herringbone patterns. It can provide good grip whether it is lateral movement or emergency stop, and there will be no slippage in the infield. Phenomenon.

But it is worth noting that if there is a lot of dust in the infield, this pair of shoes will still appear some slipping phenomenon, because such deep lines do not absorb dust, but because of the lines The reason is thicker, so if the infield is dusty, it will be prone to some slipping. This needs attention.

Of course, this is a pair of shoes that can be played both in and out.So friends who want to play outfield can safely choose to use this hardness value and the entire texture. It is a pair of wearable sneakers.

is the same as the anti-rollover of the sneaker 1. The outer side independent TPU reinforcement is used to wrap the midsole while providing the stability of the sneaker to prevent rollover. There is a certain widening, but there is no additional rollover prevention angle. In some areas where landing and exerting force are often done, the outer shading has been flipped up to provide more extreme anti-rollover properties. More suitable for some friends who like to choose in disguise.

The overall performance of

sneakers score

performance score (objective performance combat configuration)

upper performance: 9

Midsole performance: 8 points

Torsion protection: 9.5 points

Grip stability: 8 points 8 span

total score: 42.5 points

subjective scores (subjective wearing experience) _span 8span _span _strong2p2p2p Try on)