The content comes from @What is worth buying APP, and the views are only representative of the author himself | Author: Tilpiz
Preface
Zen4 is out. The price is not very friendly at present, and the motherboard is a bit expensive. The price of 7600X alone is similar to that of 5800X, not to mention that 5800X can be used to use the cost-effective motherboard B550 mortar/heavy gunner to save money from CPU, motherboard, and memory stick, and then you can replace it with a good graphics card. The extreme point is to change to 3090Ti. As the only civilian-grade graphics card currently powered by ATX 3.0, the 3090Ti is still very productive, and there is no need to mention the gaming. Let’s take a look at how this yellow flower performed yesterday.
Host and Accessories
Finished
CPU
▲ emmmmm, I remember that JD was priced around 2,000 yuan before, but now it is back to 3,000? 5800X3D is 2599 yuan, I don’t understand...
motherboard
▲ The motherboard uses MSI ’s B550m mortar. Everyone knows this motherboard.
memory
▲ The memory is made of Leksha Thor armor DDR4 3600 8G*2. This has excellent price advantage for memory sticks. The Thunder Armor series has excellent air-cooled radiator compatibility and motherboard compatibility, which can facilitate users to match cost-effective air-cooled hosts.
▲ The outer packaging of the Leksha Ray armor series is very simple. The front is the appearance of the product, the model, LOGO, memory capacity, DDR4 3600 specifications and frequency, and the back is the simple instruction manual of the product.
▲ Reksha The shape of the Thoracle armor is very simple and beautiful. The heat dissipation vest is a bit like slightly spread wings. The middle is a dark gray Reksha LOGO, and the raised flower array is symmetrically stamped on the left and right, making the product more like silver wings with spreading its wings. The heat dissipation vest in the memory is very good, the workmanship is excellent, the edge transitions are natural, and the feel is round.
▲ This side with the nameplate is facing the CPU when installed. There is little difference in shape between the back and the front.
▲ The most commendable thing about the memory modules of Leksha Thor's DDR4 3600 series are its two super high compatibility abilities:
Because the memory height is the standard memory height, it is very good for air-cooling and cooling
's compatibility with the motherboard is excellent. Just one click XMP to enable the excellent performance of DDR4 3600 C18-22-22-42. After the memory of
is set up, you can feel the three-dimensional simple design and the rounded edges, and you can assemble a host with a higher appearance.
▲ The operating parameters of Thunder Armor on the nameplate-DDR4 3600 C18-22-22 1.35v. The actual memory particle measurement is from Samsung .
▲ There is a hollow array at the top of the memory, which can better dissipate heat with the natural air duct of the chassis or radiator, achieving the effect of improving memory operation stability.
▲ There is also a very good gap between Leksha Thor armor and Ice Cube 620's cooling fan , which can maximize the use of the air duct of the cooling fan for heat dissipation. From here you can also see the excellent air-cooled radiator compatibility of Thunder Armor.
graphics card
▲ Yingchi RTX 3090Ti for graphics cards Xingyao, 4090Ti is almost on the market, I understand.
is Xingyao Niang with a very high 2D concentration... It seems that the front of the entire Xingyao graphics card series has this tone.
▲ The back shows the characteristics of graphics card .
▲ Inside the inner accessories, in addition to the most important 3090Ti Star, the accessories also come with a standard magnetic base graphics card support frame, ATX
▲ Yingchi Xingyao series graphics cards are known for their high appearance + white appearance on the front. The super high appearance and the overall crystal-like shell are combined with the controllable VRGB after power-on, and they run very brightly.
▲ The front is two large (102mm) and one small (92mm) RGB cooling fan configurations. The graphics card has a shoulder height design, and the thick three-slot thickness makes the overall cooling scale of the graphics card very large and the graphics card is also very heavy.
▲ The thickness of the graphics card of the three slots, where two slots are the thickness of the radiator. Standard SLi gold fingers are wrapped with protective cover.
▲ There is a VRGB lamp at Xingyao's LOGO, which can be connected to the ARGB interface of the motherboard through the combination of VRGB interface + data cable next to ATX 3.0 12VHPWR to achieve controllable VRGB. There is also a graphics card voltage detection port next to it, which is left for high-quality play interfaces.
▲ The pure white integrated metal heat dissipation back panel is hollowed out in parts without a PCB, which can better improve the heat dissipation ability of the graphics card. There is also a Xingyao logo on the back panel.
▲ The original default installation was a three-slot thickness PCI bezel. The display output interface is 3*DP 1.4 + 1*HDMI 2.1, and supports maximum 8K resolution HDR mode.
▲ Standard comes with a magnetic base alloy graphics card support frame, which can support the maximum SLi mode dual graphics card.
radiator
▲ The radiator uses the Ice Cube 620 white version of Jiuzhou Fengshen . This air-cooled radiator is compatible with AM5 and is matched with 5800X and 7600X. The effect is excellent, achieving both silence and heat dissipation temperature.
Jiuzhou Fengshen’s recent product packaging has been replaced with this small and fresh style, with thumbnails of the product on the front.
▲ The appearance of the Ice Cube 620 is pure white all over and has a very pleasing shape. The overall shape is a 12cm FDB silent fan and a cooling tower with a white anodized process, which can be extremely compatible with many ATX chassis . Dual cooling tower + dual fans, paired with 6 Ghent-adjustable reverse gravity heat pipe, the nominal maximum heat dissipation capacity is 260W TDP.
▲ The structure of the double tower adopts matrix heat sink design. The heat sink fin and fin are double guaranteed between to ensure the stable spacing between the heat sink fins. The fin process is used between the heat dissipation fin and the heat pipe , and the fin rate is above 95%.
▲ The pure copper base milled out of the micro-convex surface, which can increase the contact area with the CPU top cover and conduct CPU heat to the greatest extent. The pure copper base and 6 Ghent reverse gravity heat pipe are welded to conduct heat efficiently.
SSD
▲ SSD Select Kingston KC3000 1TB, and the official positioning it is a stunning PCIe 4.0 x4 NVME SSD. The nameplate on the SSD can be seen from the opening on the back.
? Why there is no front view? Because Xiamen isn't the epidemic recently... I sprayed alcohol and caused the outer packaging to fade......
▲ Kingston KC3000 In addition to the body of the disk, I also gave two M.2 fastening screws and a special screwdriver.
▲ Kingston KC3000 1TB is a single-sided SSD with a semi-height graphene aluminum heat sink on the front. The most prominent feature is that the mainboard's standard heat sink or SSD special radiator can be installed as a whole to maximize the heat sink of KC3000 1TB.
▲ The semi-height graphene aluminum heat sink is very explosive, and the thickness is thinner than that of ordinary thermal grease sheets.
▲ The back is the product's nameplate sticker. This is the product's warranty certificate, don't tear it up easily.
▲ I was curious about the configuration inside the KC3000, so I gently uncovered the graphene aluminum heat sink. I saw the true appearance of the product. What comes to your eye is the dual-channel DDR4 cache particles. This configuration is generally used at flagship level above 2TB.
Since aluminum heat sinks are extremely prone to concave and convex feeling, I do not recommend that users remove it.
▲ The master is the PS5018-E18-41 master of Qunlian PHISON. The most important feature of this master is the 12nm process, supports 176-layer flash memory particles, and PCIe 4.0 X4 configuration.
main control is the dual-channel cache of DDR4 3200 512MB *2 from South Asia.
▲ NAND particles are NAND particles encapsulated by Kingston.
▲ Use NVME flash id to view NAND's true identity, and it is indeed our old friend - Mg 's 176-layer 3D-TLC NAND particle B47R.
▲ Post back the slightly deformed graphene aluminum heat sink, and prepare to install the M.2 heat sink standard on the motherboard.
power supply
▲ Power supply I used the 850W gold medal power supply, but considering the power consumption of 3090Ti, I decisively took the 1000W power supply to ensure safety. The power supply uses the DQ1000M-V3L gold medal full module power supply from Kyushu Fengshen. It uses high temperature resistant and long-lived all-Japanese capacitor and supports intelligent start-stop fans.
▲ Although there is a protective bubble pad outside, it is still thrown into this by express delivery... Fortunately, the position of the inward trap is the position of the module line, which is not important.
Jiuzhou Fengshen outer packaging style tends to be simple. The front is the product legend, the back is the product manual, the packaging conversion efficiency, the fan running curve, etc.
▲ At a glance, it is worth mentioning that the DQ1000M-V3L Gold Medal Full Module Power Supply is aimed at the increasing power of graphics cards and people are increasingly abandoning SLi / Crossfire. The PCIe 8pin interface of the power supply is no longer characterized by many, but is based on the current popularity and has been changed to PCIe 6+2pin single interface to maximize the protection of graphics cards and power. Standard 2 * CPU 8 pins can meet daily usage needs.
▲ uses a 12cm FDB silent bearing fan. The noise control of the entire machine is excellent during actual operation, and can concentrate on playing games and do professional productivity tasks.
▲ The conversion efficiency of the power supply has reached the platinum level performance. On the premise of ensuring an output power of 1000W, the power supply size reaches the standard ATX power supply size, greatly improving the compatibility of the power supply.
▲ This is the case on both sides, there is only one LOGO of the Kyushu Fengshen.
▲ Although there are not many full module line interfaces, the +12V important equipment uses single-line and single interfaces to maximize the smooth operation of important equipment with high power.
▲ There is a main control switch at the AC power input end. It adopts square ventilation holes and uses a full LLC bridge circuit + DC-DC DC conversion inside, which has excellent conversion efficiency.
▲ There is a nameplate sticker at the bottom of the power supply, which indicates the output power of the power supply. The output power of +12V is 999.6W, which is enough to cope with 3090Ti electric tiger .
chassis
▲ The chassis still uses the Kyushu Fengshen Fantasy White CK500 chassis. This chassis has excellent compatibility, has very good fan position and dustproof treatment, and is also very good in appearance. The built-in graphics card support frame combined with the alloy graphics card support frame of Yingchi can provide multi-point support for overweight graphics cards such as 3090Ti to maximize protection of high-end graphics cards and motherboards.
▲ The front quick-removal magnetic suction panel can be easily removed, and there is a snap-on dustproof net inside, which can usually be cleaned very conveniently. The chassis comes standard with two 14025 silent cooling fans. The front panel area can support up to 360/280 water cooling, or 3 12025/14025 cooling fans.
▲ The hardware architecture inside the chassis is very excellent, and the space inside the chassis is very wide. The actual test is equipped with a 3090Ti + dual tower radiator, which also has a lot of installation space. The entire chassis can be used to remove and disassemble and assemble except for the motherboard and graphics card.
top can support 240/280 water cooling or 2 12025/14025 cooling fans. The top of
uses a magnetic dustproof net, which can easily remove dust.
▲ The backline space of the chassis is very abundant, and it is equipped with a standard 2 * 3.5-inch HDD hard drive bit +2 * 2.5-inch hard drive bit.
Theoretical Performance Test
▲ One-click XMP Setting Leksha Thunder Armor DDR4 3600 C18-22-22-42 is that simple.
▲ CPU-Z + GPU-Z and CPU + memory performance tests, and after being paired with Thunder Armor DDR4 3600 XMP, my results in this host are at the mid-to-upstream level of 5800X.
▲ Chess easily broke through 40,000 points.
▲ CinBench's series of tests also reflects the overall performance of Thunder Armor DDR4 3600 xmp + 5800X B0 stepping at an upper and higher level, with excellent cost performance.
His score was slightly lost to the overclocking score of Thunder Armor overclocking to DDR4 3866 18-22-24-44 1.4v, and also slightly lost to the DDR4 3600 Bdie - The price of Thunder Armor DDR4 16G*2 is comparable to the price of Bdie 3600 8G*2.........
▲ aida 64 memory and cache performance test, you can see that the performance of Thunder Armor DDR4 3600 XMP is very good and has excellent cost performance.
▲
▲ In the Fire Strike series test, 3090Ti and 6950XT are not distinguished. It seems that the RDNA2 architecture has advantages on DX11.
▲ Xingyao 3090Ti performed better in DX12's Time Spy series projects. The theoretical performance of DX12 in the 30 series is stronger than that of the RDNA2 architecture.
▲ Not to mention the ray tracing project. 3090Ti is the strongest ray tracing graphics card except for the 40 series.
▲ Crystal Disk Info correctly identified the specifications, models and technical parameters of Kingston KC3000 1TB.
▲ Let’s take a look at the limit performance of KC3000 1TB. The actual measured reading speed of 7389 MB/S is > 7000MB/S. The actual writing speed is about the same as the nominal 6000 MB/S.
▲ Crystal Disk Mark 1GiB test block, you can see that the performance is better than the demonstration mode, and the continuous reading and writing capabilities of 4K small files are also excellent. It surpasses the bottleneck of PCIe 3.0 X4 and officially enters the read and write performance range of PCIe 4.0.
▲ Thanks to the dual-channel cache KC3000, it did not show obvious performance attenuation on the CDM 64GiB large test block project, and it also shows that the dynamic simulated SLC acceleration space is much larger than 64GB.
game test
▲ First, test " Assassin's Creed Valhalla ", and use Benchmark to test the average frame rate of 5800X + 3090Ti. Overall, 3090Ti can ensure that "Assassin's Creed Valhalla" can be turned on and run smoothly at 4K resolution.
▲ For the latest work of the "Crisis of Isolation" series - "Crisis of Isolation 6", 5800X + 3090Ti can still run well at 4K resolution and enable extreme special effects and smooth operation, and even pair it with the monitor of G-SYNC to get a better user experience.
▲ In the game "Dust 5", ray tracing + the highest special effect is enabled. In actual testing, even in the extreme civilian use of 4K resolution, 5800X + 3090Ti can still run an average frame rate of 96 FPS.
▲ "Extreme Sports Horizon 5" also enables real-time ray tracing. You can see that 3090Ti still has an ultra-high fluency of 78 average FPS at 4K resolution.
▲ "Little Tina's Fantasy Land" comes with Benchmark. You can see that 4K resolution turns on the highest special effects, 5800X + 3090Ti shows super high fluency.
▲ Although "Red Dead Redemption 2 Redemption" supports DLSS, with the ultra-high performance of 3090Ti, you can see that under the highest special effects, 5800X + 3090Ti still has an average frame rate above 86 FPS at 4K resolution, which is quite impressive.
▲ Dota2 Select the third game of Ti auditions final RNG VS XG in China, start playing the video with the most fierce confrontation 28min, test the average frame rate, and test the actual 4K resolution of 5800X + 3090Ti. The highest special effect average frame rate is 174.2 FPS.
productivity test
▲ Use puget system Ae Benchmark V8.12.18 to test the productivity performance of After Effects CC of 5800X + 3090Ti + Thor's Armor DDR4 3600 8G*2. The final test results are shown in the figure. This configuration is very outstanding as a productivity device.
▲ PCmark 10's Extreme comprehensive performance test 5800X + 3090Ti + Thor's Armor DDR4 3600 8G*2 + B550 mortar won a total score of 11788, of which the productivity performance exceeded 1W points, and the digital content creation ability was also very strong.
▲ V-Ray comprehensive performance test 5800X + Thunder Armor DDR4 3600 8G*2 has achieved more than 11400 points, and the productivity level of this configuration is very good.
▲ In the V-Ray GPU RTX project, 3090Ti shows very strong strength, and the test score of 2788 is very outstanding.
power consumption test
▲ This machine uses typical power sockets for recording at each stage. The double baking full load is 662.87 W, and the graphics card full load is 584.33W...... Some heat generation in this year's cold wave seems to be able to determine the heat source.
summary
Zen3 Good, cost-effective, you can continue to use win10 directly, paired with Thor's Armor DDR4 3600 8G*2 + B550 Mortar/Heavy Gunner This kind of cost-effective set adds the saved money to the graphics card and buys new graphics card or non-mineral card models. It is a very good choice.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-