Preface
Apple has built wireless charging function for iPhone since iPhone 8, and upgraded from iPhone12 to magnetic wireless charging. Last time, Charging Head Network conducted an actual test on Peng Yuansheng’s car magnetic wireless charger. At present, iPhone All 12 series and iPhone 13 series support magnetic wireless charging.
Recently, Peng Yuansheng launched a three-in-one wireless charger. Charging Head Network also successfully obtained this product. Compared with the previous generation vertical wireless charger, the new charger complements the diversity of the device. Let’s take a look at it next What aspects has this charger been upgraded with?
Product Introduction
Let’s skip the packaging part and look directly at the charger itself.
has an overall black appearance design, with a matte base and glossy edge shell. It combines vertical wireless charging with desktop charging similar to the previous generation product.
The vertical wireless charging stand on the left is matched with the support bar of the frosted base. The middle is a flat wireless charging area, and the charging area on the right is white embedded. It supplies power to small accessories such as wireless watches. The Peng Yuansheng vertical wireless charger has a profound shape. It is elegant and can be easily used for desktop matching or business office.
Viewed from the side, the bottom of the vertical wireless charging pad is equipped with a slope to facilitate the placement of mobile phones, and the supporting bottom is made of rubber material, which is more stable.
Viewed from above, there is a "+" mark in the middle flat area, which reminds you to align the effective charging area to prevent the phone from being charged if it is placed in the wrong position. When you wake up the next day, you will find that the phone has been turned off.
The bottom is the charger specification inscription
Maximum charging power in vertical area: 15W
Maximum charging power in flat area: 10W
Watch area power: 5W
Output (USB-C PD3.0): 5V3A, 9V2.22A, 20W
Due to the use of DC round holes It is used as input power supply, so the power adapter is also included. And the USB-C port hidden on the back.
charger length is about 200.21mm.
charger width is about 90.46mm.
The thickness of the charger base is approximately 12.97mm.
Product Review
The above introduces the appearance and dimensions of Peng Yuansheng’s three-in-one magnetic wireless charger. Now let’s actually measure the power data of the wireless charger when charging mobile phones.
charging compatibility test
wireless charging adopts DC input interface design. In addition to supporting wireless charging, its USB-C interface also supports wired fast charging. Let’s test it in practice.
Place iPhone 13 Pro Max in the vertical wireless charging area, and use power meter to connect the socket and charger. As can be seen from the power meter, the input power of the charger at this time is 14.19W.
In the same situation, replace the mobile phone with iPhone 13 Pro, and the input power of the charger is 14.3W.
wirelessly charges iPhone 13, and the input power of the charger is 13.31W.
wirelessly charges the iPhone 13 mini. The input power of the charger is 14.7W.
is shown in the picture. It wirelessly charges 2 iPhones at the same time. The input power of the charger is 24.75W.
can wirelessly charge two mobile phones at the same time, and use the USB-C on the back of the wireless charging pad to wired fast charge of a third iPhone. The input power of the charger is 47.47W.
plus Apple Watch, the input power of the charger is 48.03W. The USB-C interface on the back of the
wireless charging pad supports fast charging. The actual measured power is 9.15V 1.64A 15.11W for iPhone 13 mini charging.
is a wired fast charger for iPhone 13 with a power of 9.18V 2.16A 19.86W.
is a wired fast charger for iPhone 13 Pro with a power of 9.17V 2.14A 19.72W.
is wired fast charging for iPhone 13 Pro Max, the power is 9.18V 2.15A 19.75W.
Summary
Peng Yuansheng’s three-in-one wireless charger has 3 wireless charging areas and a USB-C wired charging interface. With an Apple Watch, it can charge 4 devices at the same time. USB-C supports 20W wired fast charging. The wireless charging area supports iPhone 7.5W wireless charging, which is a good choice for users who hold multiple devices.
Full charging test
Full charging test of Peng Yuansheng three-in-one wireless charger. This time we chose to charge iPhone 13 Pro. The picture below is the actual measured data.
This is the full chart of the data changes when using the Peng Yuansheng three-in-one wireless charger to charge the iPhone 13 Pro. The whole process is roughly divided into 4 stages, and the maximum power is 9.17V 2.20A 20.15W.
From the beginning of the test to 36 minutes, the input power was around 15W; to 46 minutes, the input power gradually dropped to around 11W; to 1 hour and 6 minutes, the input power gradually dropped to 6W; finally charging ended at 1 hour and 38 minutes.
plotted the entire charging process into a curve chart. It can be seen that this charger charges 54% of the iPhone 13 Pro in half an hour, 85% in one hour, and takes 1 hour and 38 minutes to fully charge.
Charging Head Network Summary
three-in-one wireless charger Compared with the previous generation product, it inherits the design style of vertical wireless charging and desktop wired charging. Similarly, for users with many devices, the desktop placement design is an appreciation own aesthetic results.
Peng Yuansheng’s three-in-one wireless charger can charge 4 devices at the same time. In the past, the desktop required 4 wires, but now only one wire is needed to charge multiple devices, and the desktop immediately becomes much cleaner.
For commonly used mobile phones, it is more recommended to use it with a vertical wireless charging area, so that messages from the mobile phone can be viewed at any time when on the desktop. Other charging positions can be reserved for a second mobile phone or Bluetooth headset , which can be used by the whole family. Solve it once.
This three-in-one wireless charger can charge three devices at the same time. The hidden USB-C interface has a maximum output of 20W, making it easy to charge smart devices that do not support wireless charging. In addition, it supports other wearable devices in addition to mobile phones, adding to the diversity of compatible devices. However, what needs to be improved is the individually designed round hole DC adapter, which will make it more difficult to repair or purchase accessories in the future. I don’t know if you have any opinions on this. What attitude?
