Hello, Hello everyone~
Today I will introduce you to a Japanese lathe car with interesting price comparison, which is very different from the mainstream lathe car models we used to have. Let’s take a look~
This car is still made of the Nissan NV200 chassis. As we all know, NV200 is also a relatively small model, and the internal space after being transformed into a lathe car is also very limited. However, this car has added an extra space to the top of the vehicle to increase the internal usage space. The body sizes of the entire car are 4400*1690*2330 mm respectively. The overall size is also no problem for daily transportation.
power, this car is equipped with a 1.6-liter gasoline engine, matched with an automatic transmission, and a two-wheel drive system. If it is a family scooter, the overall power is relatively suitable, and the fuel consumption is relatively acceptable. In addition, some of the most basic system configurations such as reversing images and driving navigation are also provided inside the cab, which can also provide certain convenience for the driver's later control.
Inside the car, there is a row of sofa seats for three people, which are made of fabric coated materials to be more skin-friendly. The seats face forward when driving so that you won’t feel uncomfortable.
When you need to eat after parking, you can face the three-person seat back and form a wraparound layout with the rear seat collapse and the side seat collapse. A small dining table is matched in the middle, so a simple dining area is created.
On the side is a small kitchen operating table. The countertop is equipped with a flip sink and a pull-out faucet can be placed outside the car for use. It can be used as a cooking area, or connected to a portable stove in the later stage, and can also be cooked simply. The most interesting thing is that the desktop can be folded upwards, so that the space below can also be seated. Although the space in the entire car is limited, it can accommodate many people to have a meal here.
When you need to sleep and rest at night, put the three-person sofa seat in front upside down and flat, and splice it with the seat in the back to become a flat bed, which can also accommodate two adults.
As we said at the beginning of the article, the top has been raised. In addition to allowing the personnel in the car to obtain more head space, it also serves as a seating area, which means that the entire car can be built into a double bed with upper and lower beds, and the upper bed is also equipped with small external push windows, which can ensure lighting and ventilation on the upper floor.
Open the upper-cut rear tailgate, you can also see the storage space located under the bed board, and can also store some large luggage items for daily pickup.
water circuit, in addition to the basic driving power system, this car also provides inverter and a 100-ampere secondary battery. At the same time, the waterway is also equipped with a 10-liter water purification tank and a 10-liter sewage tank. Simple water and electricity requirements can still be met.
This small lathe car equipped with Nissan NV200 chassis not only gains more space for the car through appearance changes, but also the design of the upper and lower double beds can also meet the needs of the four family of four. The current price of this car overseas is 3.85 million yen, equivalent to about 189,200 yuan (based on the exchange rate of the day). I wonder what do you think of this design? Welcome to communicate and interact with us in the comment section below. See you next time~
